Transformations
In a minute
A moves or resizes a shape to give its . You draw and describe four: , , and .
You'll be able to
- Translate a shape by a .
- Reflect a shape in a vertical or horizontal line.
- Rotate a shape through a multiple of about the , a corner or the midpoint of an edge.
- Enlarge a shape by a whole-number or fractional from a centre.
- Reflect in any straight line, such as , and rotate about any centre.
- Enlarge by a negative scale factor, and combine two transformations.
Before you start3 quick questions on what this builds on
Revise first: 3.1 Coordinates, 4.1 Geometrical terms, 4.4 Similarity and 4.5 Symmetry
Translations and column vectors
A moves a shape or changes its size. The shape you start with is the object; the new shape is its . The image of is often called .
A has size and direction. A translation is written as a : move across (negative is left), then up (negative is down).
Try it first, then reveal one step at a time.
- The vector means 4 right, 3 down: add to each and subtract from each .
- , , .
- Check against the figure.
Try it first, then reveal one step at a time.
- Same size and same way up: a translation.
- Across: . Up: .
- Translation by .
Reflections
The line is vertical: every point on it has -coordinate . The line is horizontal. The -axis is ; the -axis is .
Try it first, then reveal one step at a time.
- The line is vertical, so each -coordinate stays the same.
- is 1 unit right of the line, so its image is 1 unit left: .
- and are 3 units right, so their images are 3 units left: and .
Try it first, then reveal one step at a time.
- is the same size but flipped upside down: a reflection.
- Matching corners share their -coordinate, so the mirror line is horizontal, halfway between them.
- Halfway between and : . The pair , agrees.
- Reflection in the line .
You can reflect in any straight line. For , swap the coordinates: . For : .
For any other line, move each point at right angles to the line until it reaches the line, then the same distance again beyond it.
Try it first, then reveal one step at a time.
- The line slopes at , so move diagonally up and left, at right angles to it.
- , which is on the line, since . That is 3 steps.
- Three more steps: .
Rotations
A turns a shape about a fixed point, the centre. Describe it by its centre, its angle and its direction: clockwise or anticlockwise. A half turn, , needs no direction. one way is the other way.
Tracing paper works, as for . On a grid you can count instead: turn the move from the centre to each corner.
About the , the move is the point itself, so a quarter turn anticlockwise sends to .
Try it first, then reveal one step at a time.
- A quarter turn is . Clockwise about the origin: .
- , , .
- Check with tracing paper.
Try it first, then reveal one step at a time.
- is the centre, so it stays at .
- to is 3 across, 0 up. Turned anticlockwise: 0 across, 3 up. So .
- to is 0 across, 2 up. Turned: 2 left, 0 up. So .
The centre can be any point; count moves from it as before. A half turn's centre is the midpoint of any point and its image. For a quarter turn, test likely centres with tracing paper.
Enlargements
To draw one, find the move from the centre to each corner, multiply it by , and add it to the centre.
Try it first, then reveal one step at a time.
- Centre to is 1 across, 1 up. Times 3: 3 across, 3 up. Image .
- Likewise gives , and gives .
- Check: the base is 3 times as long.
To describe an enlargement, divide an image length by the matching object length for the scale factor. Then draw lines through matching corners: they meet at the centre.
Try it first, then reveal one step at a time.
- is smaller: an enlargement. Widths and give scale factor .
- The line through and is . The line through and goes 4 right, 3 down per step, reaching on .
- Enlargement, scale factor , centre .
A negative scale factor reverses the move from the centre: the image is upside down, on the other side. Ignore the sign for lengths, but give it when you describe the enlargement.
Try it first, then reveal one step at a time.
- Centre to : 2 across, 2 up. Times : , . Image .
- Centre to : 4, 2. Times : , . Image .
- Centre to : 2, 6. Times : , . Image .
Which transformation?
Different size: enlargement. Same size and way up: translation. Flipped: reflection. Turned: rotation.
Try it first, then reveal one step at a time.
- Same size, and every side now points the opposite way: a half turn.
- The centre is the midpoint of a corner and its image: , the midpoint of an edge of .
- Rotation, , centre .
A is one transformation followed by another: apply the second to the image of the first. The order can change the result, so keep to the order given.
Try it first, then reveal one step at a time.
- Reflecting in the -axis: , , .
- Then in the -axis: , , .
- Each has gone to : a half turn. The midpoint of and is .
- Rotation, , centre .
Common mistakes
- Reading a negative bottom number as up. In the means 5 down.
- Counting from an axis when the mirror line is, say, . Count from the mirror line.
- Mixing up (vertical) with .
- Giving a rotation with no direction, or "right". Write clockwise or anticlockwise; only a turn needs no direction.
- Leaving out the centre or scale factor of an enlargement.
- Describing two transformations when the question asks for one. Two score nothing.
Exam tips
- "Describe fully": name the transformation, then its details. Translation: vector. Reflection: mirror line. Rotation: centre, angle, direction. Enlargement: centre, scale factor.
- "Draw the image": work out each corner's coordinates, then join them with a ruler.
Key takeaways
Practise this
79 past-paper questions on 7.1 in the 0580 Extended bank, each with a mark scheme and a worked explanation.