Number and algebra cheat sheet

BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.

Number and algebra

IB MATHS AI · HL
pastpaperprep.com/revision-notes

1.1Standard form

a×10k,1≤a<10,k∈Za \times 10^{k}, \quad 1 \le a < 10, \quad k \in \mathbb{Z}LEARN
To write a number in standard form, put the point after the first non-zero digit. kk counts the places it moved, and is negative for numbers between 00 and 11.LEARN
Multiply: multiply the front numbers, add the powers. Divide: divide, subtract the powers. Integer power nn: (a×10m)n=an×10mn(a \times 10^{m})^{n} = a^{n} \times 10^{mn}. Then rewrite the result so that 1≤a<101 \le a < 10, changing the power to balance.LEARN
Add or subtract only after writing both numbers with the same power of 1010. To compare positive numbers in standard form, compare the powers first.LEARN
Never give calculator notation such as 6.08E-5 as an answer: write 6.08×10−56.08 \times 10^{-5}, with aa exact or to 3 s.f. unless told otherwise.LEARN

1.2Arithmetic sequences and series

un=u1+(n−1)du_{n} = u_{1} + (n - 1)dBOOKLET
Sn=n2(2u1+(n−1)d);Sn=n2(u1+un)S_{n} = \frac{n}{2}\left(2u_{1} + (n - 1)d\right); \quad S_{n} = \frac{n}{2}\left(u_{1} + u_{n}\right)BOOKLET
A sequence is arithmetic when d=un+1−und = u_{n+1} - u_{n} is the same for every pair of consecutive terms. From umu_{m} to unu_{n} there are n−mn - m steps.LEARN
∑r=ab\sum_{r=a}^{b} adds the terms for every whole number rr from aa to bb, both included: b−a+1b - a + 1 terms. A general term mr+cmr + c gives an arithmetic sum with d=md = m.LEARN
Simple interest at R%R\% a year on PP adds P×R100P \times \frac{R}{100} every year, so the yearly balances are arithmetic. If unu_{n} is the balance at the end of year nn, then u1=P+P×R100u_{1} = P + P \times \frac{R}{100}.LEARN
Roughly arithmetic data: d≈last value−first valuenumber of values−1d \approx \frac{\text{last value} - \text{first value}}{\text{number of values} - 1}. Predictions far beyond the data are less reliable.LEARN
A number of terms nn is a positive integer. With a limit, round in the direction the limit needs and check the values either side.LEARN

1.3Geometric sequences and series

A sequence is geometric when every quotient un+1un\frac{u_{n+1}}{u_{n}} equals the same number rr.LEARN
un=u1rn−1u_{n} = u_{1}r^{n-1}BOOKLET
Sn=u1(rn−1)r−1=u1(1−rn)1−r,r≠1S_{n} = \frac{u_{1}(r^{n} - 1)}{r - 1} = \frac{u_{1}(1 - r^{n})}{1 - r}, \quad r \neq 1BOOKLET
Growing by p%p\% per period means r=1+p100r = 1 + \frac{p}{100}; shrinking by p%p\% per period means r=1−p100r = 1 - \frac{p}{100}.LEARN
If you know two terms of a geometric sequence, express each as u1u_{1} times a power of rr, then divide to eliminate u1u_{1}. An even power, e.g. r2=16r^{2} = 16, gives two possible ratios, r=±4r = \pm 4, unless the context rules one out.LEARN
The sum ∑k=ab\sum_{k=a}^{b} contains b−a+1b - a + 1 terms, and its first term comes from k=ak = a.LEARN
For the least whole nn that meets a condition, solve or tabulate on your GDC, check the whole numbers on both sides, and give one value.LEARN
For r>0r > 0 and r≠1r \ne 1, un=u1rn−1u_{n} = u_{1}r^{n-1} is an exponential function of nn. In data, nearly equal ratios suggest a geometric model; nearly equal differences suggest a linear one.LEARN

1.4Compound interest and depreciation

FV=PV×(1+r100k)knFV = PV \times \left(1 + \frac{r}{100k}\right)^{kn}BOOKLET
Compound interest multiplies the balance by the same number each period, so balances are geometric. Simple interest adds the same amount, so balances are arithmetic.LEARN
k=1,2,4,12k = 1, 2, 4, 12 for yearly, half-yearly, quarterly and monthly compounding. The rate per period is rk%\frac{r}{k}\% and the number of periods is knkn.LEARN
FV=PV×(1−r100)nFV = PV \times \left(1 - \frac{r}{100}\right)^{n}LEARN
Finance solver with no regular payments: PMT=0PMT = 0, P/Y=C/Y=kP/Y = C/Y = k, N=knN = kn. Money paid out is negative, money received positive; depreciation has a negative I%I\%.LEARN
Real value, using the real rate: interest rate rr minus inflation rate ii (an approximation): FVreal=PV×(1+r−i100k)knFV_{\text{real}} = PV \times \left(1 + \frac{r - i}{100k}\right)^{kn}.LEARN
When interest is added only at the end of each period, round a number of periods up to reach a target.LEARN

1.5Exponents and introductory logarithms

am×an=am+naman=am−n(am)n=amn(ab)n=anbn(m,n∈Z; a,b≠0 if an exponent is zero or negative)a^{m} \times a^{n} = a^{m+n} \qquad \frac{a^{m}}{a^{n}} = a^{m-n} \qquad \left(a^{m}\right)^{n} = a^{mn} \qquad (ab)^{n} = a^{n}b^{n} \qquad (m, n \in \mathbb{Z};\ a, b \neq 0 \text{ if an exponent is zero or negative})LEARN
For a≠0a \neq 0: a0=1a^{0} = 1 and a−n=1ana^{-n} = \frac{1}{a^{n}}. A negative exponent gives a reciprocal, never a negative number, and 3x−3=3x33x^{-3} = \frac{3}{x^{3}} because only xx carries the exponent.LEARN
ax=b  ⟺  x=log⁡ab,where a>0, b>0, a≠1a^{x} = b \iff x = \log_{a} b, \quad \text{where } a > 0,\ b > 0,\ a \neq 1BOOKLET
You can take the log only of a positive number. The log itself can be negative: for base a>1a > 1, a number between 00 and 11 has a negative log.LEARN
ln⁡x=log⁡ex\ln x = \log_{\mathrm{e}} x for x>0x > 0, where e=2.71828…\mathrm{e} = 2.71828\ldots For b>0b > 0, solve 10x=b10^{x} = b with x=log⁡10bx = \log_{10} b and ex=b\mathrm{e}^{x} = b with x=ln⁡bx = \ln b.LEARN
On the GDC: LOG is base 1010, LN is base e\mathrm{e}, and the log-with-base template does any other base. Write the log you evaluate before the decimal answer.LEARN

1.6Rounding, bounds and percentage error

Significant figures count from the first non-zero digit. Keep place-holding zeros (86 390→86 00086\,390 \to 86\,000 to 22 s.f.) and zeros made by rounding (5.698→5.705.698 \to 5.70 to 33 s.f.).LEARN
Give answers exactly or to 33 s.f. unless told otherwise, and money usually to 22 d.p. Keep full calculator values until the final answer.LEARN
A value rounded to the nearest uu has bounds half a step either side: rounded−u2≤x<rounded+u2\text{rounded} - \frac{u}{2} \le x < \text{rounded} + \frac{u}{2}.LEARN
For positive quantities, a product is largest with every factor at its upper bound, and ab\frac{a}{b} is largest with aa at its upper bound and bb at its lower bound.LEARN
ε=∣vA−vEvE∣×100%\varepsilon = \left|\frac{v_{A} - v_{E}}{v_{E}}\right| \times 100\%BOOKLET
Maximum percentage error from a rounded measurement: find the result at each bound, use each as vEv_{E} with the rounded result as vAv_{A}, and keep the larger percentage error.LEARN
Estimate by rounding each number to 11 s.f. Reject answers that are impossible in context, such as a negative length.LEARN

1.7Amortization and annuities

In IB exams, payments are made at the end of each period: set PMT: ENDPMT\text{: END}. The last payment earns no interest.LEARN
NN is the number of payments. P/YP/Y is payments per year and C/YC/Y is how many times interest is added per year; they can differ.LEARN
Signs: savings have PMT<0PMT < 0 and FV>0FV > 0. An annuity has PV<0PV < 0, PMT>0PMT > 0 and FV=0FV = 0 when it runs out. A loan has PV>0PV > 0, PMT<0PMT < 0 and FV=0FV = 0 when it is cleared.LEARN
Interest on a loan == total of all payments −- amount borrowed. Interest on savings == final value −- total paid in.LEARN
The number of full withdrawals an annuity can make is the solver's NN rounded down.LEARN
Annuity formula, not examined: FV=PMT×(1+i)N−1iFV = PMT \times \frac{(1 + i)^{N} - 1}{i} is the value just after NN end-of-period payments into an empty account, with interest added once per period at rate ii.LEARN

1.8Solving equations with technology

To solve a system: name each unknown with its units, write one equation per fact, write the system down, then use the GDC's simultaneous equation solver.LEARN
Line each equation up as ax+by=cax + by = c (or ax+by+cz=dax + by + cz = d with three unknowns) before entering it, with 00 for a missing unknown.LEARN
In IB AI exams, a system of linear equations (up to 33 unknowns) always has exactly one solution, and any correct method earns the marks.LEARN
For a curve y=ax2+bx+cy = ax^{2} + bx + c through three given points, substitute each point to get three linear equations in aa, bb and cc.LEARN
The roots of p(x)=0p(x) = 0 are the zeros of pp: the xx-coordinates where y=p(x)y = p(x) meets the xx-axis. The yy-intercept p(0)p(0) is not a zero unless p(0)=0p(0) = 0.LEARN
Rearrange a polynomial equation to p(x)=0p(x) = 0 before using the root finder. A polynomial equation of degree n≥1n \ge 1 has at most nn real roots.LEARN
In context, keep only the roots that fit the model, and say why you reject the others.LEARN

1.9 ◆Laws of logarithms

log⁡axy=log⁡ax+log⁡ay\log_{a} xy = \log_{a} x + \log_{a} yBOOKLET
log⁡axy=log⁡ax−log⁡ay\log_{a} \frac{x}{y} = \log_{a} x - \log_{a} yBOOKLET
log⁡axm=mlog⁡ax\log_{a} x^{m} = m\log_{a} xBOOKLET
The laws need aa, xx and yy positive with a≠1a \neq 1. In exams the base is 1010 or e\mathrm{e}. There is no law for the log of a sum.LEARN
For k>0k > 0: y=kebxy = k\mathrm{e}^{bx} gives ln⁡y=ln⁡k+bx\ln y = \ln k + bx, a straight line of ln⁡y\ln y against xx; y=kxny = kx^{n} with x>0x > 0 gives ln⁡y=ln⁡k+nln⁡x\ln y = \ln k + n\ln x, a straight line of ln⁡y\ln y against ln⁡x\ln x.LEARN
Multiplying a positive quantity by c>0c > 0 adds log⁡10c\log_{10} c to its base-1010 log. Multiplying a sound's intensity by cc adds 10log⁡10c10\log_{10} c dB.LEARN
After solving a log equation, check each value in the original equation and reject any value that makes the inside of a log zero or negative.LEARN

1.10 ◆Rational exponents

amn=(an)m=amn,a>0, m∈Z, n∈Z+a^{\frac{m}{n}} = \left(\sqrt[n]{a}\right)^{m} = \sqrt[n]{a^{m}}, \quad a > 0,\ m \in \mathbb{Z},\ n \in \mathbb{Z}^{+}LEARN
For a>0a > 0, a−p=1apa^{-p} = \frac{1}{a^{p}}, so x−12=1xx^{-\frac{1}{2}} = \frac{1}{\sqrt{x}} for x>0x > 0. A negative exponent gives a reciprocal, never a negative number.LEARN
ap×aq=ap+qapaq=ap−q(ap)q=apq(ab)p=apbp(a,b>0, p,q∈Q)a^{p} \times a^{q} = a^{p+q} \qquad \frac{a^{p}}{a^{q}} = a^{p-q} \qquad \left(a^{p}\right)^{q} = a^{pq} \qquad (ab)^{p} = a^{p}b^{p} \qquad (a, b > 0,\ p, q \in \mathbb{Q})LEARN
In a model y=kxpy = kx^{p} with kk constant and x>0x > 0, multiplying xx by c>0c > 0 multiplies yy by cpc^{p}.LEARN
For x>0x > 0, c>0c > 0 and non-zero integers mm and nn, xmn=cx^{\frac{m}{n}} = c gives x=cnmx = c^{\frac{n}{m}}. On the GDC, bracket the exponent, as in 29.5^(2/3), and keep it as a fraction.LEARN

1.11 ◆Infinite geometric series

S∞=u11−r,∣r∣<1S_{\infty} = \frac{u_{1}}{1 - r}, \quad \lvert r\rvert < 1BOOKLET
A geometric series has a sum to infinity only when −1<r<1-1 < r < 1. Then S∞=lim⁡n→∞SnS_{\infty} = \lim_{n \to \infty} S_{n}.LEARN
Working back from S∞S_{\infty} can give two ratios. Reject any with ∣r∣≥1\lvert r\rvert \ge 1, and any the context rules out, and say why.LEARN
A starting amount plus increases with ratio 0<r<10 < r < 1 never exceeds the starting amount plus S∞S_{\infty} of the increases.LEARN
Least nn for a total of positive terms to pass a target: if 0<r<10 < r < 1, first check the target is below S∞S_{\infty}, or it is never passed. Then solve Sn>targetS_{n} > \text{target} on the GDC, test the whole numbers either side and give the first that works.LEARN
Fractals: positive amounts added stage by stage with ratio ∣r∣<1\lvert r\rvert < 1 have a finite total; with r≥1r \ge 1, like the Koch perimeter's 43\frac{4}{3}, they grow without limit.LEARN

1.12 ◆Complex numbers in Cartesian form

z=a+biz = a + b\mathrm{i}BOOKLET
i2=−1\mathrm{i}^{2} = -1. For z=a+biz = a + b\mathrm{i} with a,ba, b real: Re(z)=a\mathrm{Re}(z) = a, Im(z)=b\mathrm{Im}(z) = b (a real number) and z∗=a−biz^{*} = a - b\mathrm{i}.LEARN
Divide by hand: multiply the top and the bottom by the conjugate of the bottom, using zz∗=a2+b2zz^{*} = a^{2} + b^{2}. Find powers with the GDC in a+bia + b\mathrm{i} mode.LEARN
∣z∣=a2+b2\lvert z\rvert = \sqrt{a^{2} + b^{2}}LEARN
arg⁡z\arg z (z≠0z \neq 0): the anticlockwise angle from the positive real axis, in radians, usually −π<arg⁡z≤π-\pi < \arg z \le \pi. Sketch the quadrant: arctan⁡ba\arctan\frac{b}{a} alone is right only when a>0a > 0.LEARN
Δ=b2−4ac\Delta = b^{2} - 4acBOOKLET
If aa, bb, cc are real, a≠0a \neq 0 and Δ<0\Delta < 0: the graph of y=ax2+bx+cy = ax^{2} + bx + c never meets the xx-axis, and the roots are a conjugate pair −b2a±4ac−b22ai-\frac{b}{2a} \pm \frac{\sqrt{4ac - b^{2}}}{2a}\mathrm{i}, with real part at the vertex's xx-coordinate.LEARN

1.13 ◆Complex numbers in polar and exponential form

z=r(cos⁡θ+isin⁡θ)=reiθ=r cis θz = r(\cos\theta + \mathrm{i}\sin\theta) = r\mathrm{e}^{\mathrm{i}\theta} = r\,\mathrm{cis}\,\thetaBOOKLET
For z=a+bi≠0z = a + b\mathrm{i} \ne 0: r=a2+b2r = \sqrt{a^{2} + b^{2}}. For θ\theta, sketch the point: arctan⁡ba\arctan\frac{b}{a} alone points the wrong way when a<0a < 0. Use −π<θ≤π-\pi < \theta \le \pi, in radians, unless told otherwise.LEARN
Multiply: multiply the moduli, add the arguments. Divide: divide the moduli, subtract the arguments. For an integer nn, (reiθ)n=rneinθ\left(r\mathrm{e}^{\mathrm{i}\theta}\right)^{n} = r^{n}\mathrm{e}^{\mathrm{i}n\theta}. Then add or subtract multiples of 2π2\pi to bring the argument into range.LEARN
Add and subtract in Cartesian form, like vectors. ∣z−w∣\lvert z - w\rvert is the distance between the points zz and ww.LEARN
Multiplying by w=Reiφw = R\mathrm{e}^{\mathrm{i}\varphi} (R>0R > 0) is an enlargement with scale factor RR, centre O, and a rotation through φ\varphi about O: anticlockwise if φ>0\varphi > 0, clockwise if φ<0\varphi < 0.LEARN
Same ω\omega only: A1cos⁡(ωt+α1)+A2cos⁡(ωt+α2)=Rcos⁡(ωt+B)A_{1}\cos(\omega t + \alpha_{1}) + A_{2}\cos(\omega t + \alpha_{2}) = R\cos(\omega t + B), where ReiB=A1eiα1+A2eiα2R\mathrm{e}^{\mathrm{i}B} = A_{1}\mathrm{e}^{\mathrm{i}\alpha_{1}} + A_{2}\mathrm{e}^{\mathrm{i}\alpha_{2}}. The same holds with sin⁡\sin throughout.LEARN

1.14 ◆Matrices, determinants and inverses

A=(abcd)⇒det⁡A=∣A∣=ad−bcA = \begin{pmatrix} a & b\\ c & d \end{pmatrix} \Rightarrow \det A = |A| = ad - bcBOOKLET
A=(abcd)⇒A−1=1det⁡A(d−b−ca), ad≠bcA = \begin{pmatrix} a & b\\ c & d \end{pmatrix} \Rightarrow A^{-1} = \frac{1}{\det A}\begin{pmatrix} d & -b\\ -c & a \end{pmatrix},\ ad \neq bcBOOKLET
Order m×nm \times n means mm rows and nn columns. Add or subtract matrices of the same order element by element; kAkA multiplies every element by kk.LEARN
ABAB exists only when AA has as many columns as BB has rows: (m×n)(n×p)(m \times n)(n \times p) gives m×pm \times p. Each element is a row of AA times a column of BB.LEARN
When the products are defined, (AB)C=A(BC)(AB)C = A(BC) and A(B+C)=AB+ACA(B + C) = AB + AC, but in general AB≠BAAB \neq BA.LEARN
AI=IA=AAI = IA = A for a square matrix AA and the identity II of the same order; A+0=AA + 0 = A for the zero matrix of the same order.LEARN
A square matrix AA has an inverse only when det⁡A≠0\det A \neq 0; then AA−1=A−1A=IAA^{-1} = A^{-1}A = I.LEARN
nn linear equations in nn unknowns form Ax=bA\boldsymbol{x} = \boldsymbol{b}. If det⁡A≠0\det A \neq 0, the solution is x=A−1b\boldsymbol{x} = A^{-1}\boldsymbol{b}, with A−1A^{-1} on the left.LEARN
Coding: send C=KMC = KM, with the letter numbers in the columns of MM. Decoding: M=K−1CM = K^{-1}C, which needs det⁡K≠0\det K \neq 0.LEARN

1.15 ◆Eigenvalues and eigenvectors

For a square matrix AA, λ\lambda is an eigenvalue with eigenvector v\boldsymbol{v} when Av=λvA\boldsymbol{v} = \lambda\boldsymbol{v} and v≠0\boldsymbol{v} \neq \boldsymbol{0}. Any non-zero multiple of v\boldsymbol{v} is also an eigenvector for λ\lambda.LEARN
det⁡(A−λI)=λ2−(a+d)λ+(ad−bc)for A=(abcd); its roots are the eigenvalues\det(A - \lambda I) = \lambda^{2} - (a + d)\lambda + (ad - bc) \quad \text{for } A = \begin{pmatrix}a & b\\ c & d\end{pmatrix}\text{; its roots are the eigenvalues}LEARN
To find an eigenvector for an eigenvalue λ\lambda of a 2×22 \times 2 matrix AA, solve (A−λI)v=0(A - \lambda I)\boldsymbol{v} = \boldsymbol{0}. The two equations are multiples of each other: pick any non-zero solution.LEARN
A 2×22 \times 2 matrix with two different real eigenvalues can be written A=PDP−1A = PDP^{-1}: eigenvectors as the columns of PP, and the matching eigenvalues, in the same order, on the diagonal of DD.LEARN
M=PDP−1⇒Mn=PDnP−1,Dn=(λ1 n00λ2 n)M = PDP^{-1} \Rightarrow M^{n} = PD^{n}P^{-1}, \quad D^{n} = \begin{pmatrix}\lambda_{1}^{\,n} & 0\\ 0 & \lambda_{2}^{\,n}\end{pmatrix}BOOKLET
In xn=Mnx0\boldsymbol{x}_n = M^{n}\boldsymbol{x}_0 with M=PDP−1M = PDP^{-1}, the part of x0\boldsymbol{x}_0 along each eigenvector is multiplied by its eigenvalue at every step. As n→∞n \to \infty that part dies away if ∣λ∣<1\lvert\lambda\rvert < 1 and stays the same if λ=1\lambda = 1. If it is not zero and ∣λ∣>1\lvert\lambda\rvert > 1, it grows without limit.LEARN

Which method when

Same amount added each step (equal differences, simple interest), 'find the 20th term' or 'total after n weeks' → arithmetic sequence: un=u1+(n−1)du_{n} = u_{1} + (n - 1)d and Sn=n2(2u1+(n−1)d)S_{n} = \frac{n}{2}(2u_{1} + (n - 1)d) (1.2)LEARN
Grows or falls by a fixed percentage each period, or equal ratios between terms → geometric sequence with r=1±p100r = 1 \pm \frac{p}{100}: un=u1rn−1u_{n} = u_{1}r^{n-1}, and SnS_{n} (r≠1r \ne 1) for a total; for 'first n that…', solve or tabulate on the GDC and check both neighbours (1.3)LEARN
One lump sum left to grow, compounded k times a year, or depreciation at a fixed r% a year → FV=PV(1+r100k)knFV = PV\left(1 + \frac{r}{100k}\right)^{kn} or the finance solver with PMT=0PMT = 0, P/Y=C/Y=kP/Y = C/Y = k, N=knN = kn, PVPV negative and FVFV positive; depreciation uses I%=−rI\% = -r with k=1k = 1 (1.4)LEARN
'In today's prices' or 'allowing for inflation' → real value: use the real rate r−ir - i (an approximation) in the compound interest formula or the finance solver (1.4)LEARN
A regular payment each period: saving monthly, an annuity paying out, or repaying a loan → finance solver with PMTPMT entered, NN = number of payments, payments at the end of each period, money paid out negative (1.7)LEARN
'Maximum percentage error' caused by rounding a measurement → find the result at the lower and upper bounds, use each as vEv_{E} with the rounded result as vAv_{A}, and keep the larger ∣vA−vEvE∣×100%\left|\frac{v_{A} - v_{E}}{v_{E}}\right| \times 100\% (1.6)LEARN
Unknown in the exponent, such as 10x=b10^{x} = b or ex=b\mathrm{e}^{x} = b with b>0b > 0 → x=log⁡10bx = \log_{10} b or x=ln⁡bx = \ln b, or the GDC's equation solver; get the power on its own first (1.5)LEARN
Several facts about the same 2 or 3 unknowns, or a quadratic through three given points → write the system, then the GDC's simultaneous equation solver; a polynomial equation → rearrange to p(x)=0p(x) = 0, use the root finder and keep only the roots that fit the context (1.8)LEARN

◆Which method when

'Write as a single logarithm', 'expand', or a log equation such as ln⁡x+ln⁡(x+5)=ln⁡14\ln x + \ln(x + 5) = \ln 14 → laws of logarithms (booklet; base 1010 or e\mathrm{e}, every inside positive): product → sum, quotient → difference, power → multiple, no law for log⁡(x+y)\log(x + y); reject any solution that makes a log undefined (1.9)LEARN
Fractional powers: 'exact value of 81−3481^{-\frac{3}{4}}', 'write in the form kxpkx^{p}', or solve xmn=cx^{\frac{m}{n}} = c → for a>0a > 0, amn=(an)ma^{\frac{m}{n}} = \left(\sqrt[n]{a}\right)^{m} (root first), laws of exponents with positive bases; for x,c>0x, c > 0, x=cnmx = c^{\frac{n}{m}}, with the exponent bracketed on the GDC (1.10)LEARN
'Total in the long run', 'the most a total of positive terms can reach', or a fractal's area → S∞=u11−rS_{\infty} = \frac{u_{1}}{1 - r}, only if ∣r∣<1\lvert r\rvert < 1, approached but never reached, plus any starting amount; 'first nn when the total passes…' → check the target is below S∞S_{\infty}, then SnS_{n} on the GDC and test both neighbours (1.11)LEARN
Quadratic with real coefficients and b2−4ac<0b^{2} - 4ac < 0, or add, subtract, multiply or divide complex numbers → Cartesian form: quadratic formula with Δ=4ac−b2 i\sqrt{\Delta} = \sqrt{4ac - b^{2}}\,\mathrm{i} (a conjugate pair); divide by hand by multiplying top and bottom by the conjugate of the bottom; powers on the GDC in a+bia + b\mathrm{i} mode (1.12)LEARN
Products, quotients or powers of complex numbers, or 'describe fully' z↦wzz \mapsto wz → exponential form: multiply moduli and add arguments (scale factor ∣w∣\lvert w\rvert, rotation arg⁡w\arg w about O), then bring the argument back into range; adding A1cos⁡(ωt+α1)+A2cos⁡(ωt+α2)A_{1}\cos(\omega t + \alpha_{1}) + A_{2}\cos(\omega t + \alpha_{2}) with the same ω\omega → A1eiα1+A2eiα2A_{1}\mathrm{e}^{\mathrm{i}\alpha_{1}} + A_{2}\mathrm{e}^{\mathrm{i}\alpha_{2}} on the GDC in radians: modulus = amplitude, argument = phase (1.13)LEARN
Tables of amounts and prices, nn linear equations in nn unknowns 'using an inverse matrix', or coding a message → matrices: ABAB needs columns of AA = rows of BB, and order matters; Ax=bA\boldsymbol{x} = \boldsymbol{b} gives x=A−1b\boldsymbol{x} = A^{-1}\boldsymbol{b} when det⁡A≠0\det A \neq 0; decode with M=K−1CM = K^{-1}C (1.14)LEARN
Two groups or places swapping members each step, 'MnM^{n} in terms of nn' or 'long-term' for a 2×22 \times 2 matrix → eigenvalues from det⁡(M−λI)=0\det(M - \lambda I) = 0, eigenvectors from (M−λI)v=0(M - \lambda I)\boldsymbol{v} = \boldsymbol{0}, then Mn=PDnP−1M^{n} = PD^{n}P^{-1} (two different real eigenvalues); parts with ∣λ∣<1\lvert\lambda\rvert < 1 die away and an eigenvector for λ=1\lambda = 1 gives the steady split (1.15)LEARN
Follows the IB Maths AI guide (first assessment 2021). Not affiliated with the IB.