Geometric sequences and series
In a minute
A is built by multiplying by one fixed number, the , at each step: has . Two booklet formulas give you any single term, or the total of the first terms. They model anything that changes by a fixed percentage each period, such as salaries, outbreaks and populations.
You'll be able to
- Recognise a and work out any term using .
- Add up the first terms, using the formula or your GDC.
- Use for geometric sums, and evaluate them.
- Model salaries, disease spread and populations, stating and and using technology.
- Link geometric sequences to exponential models, and choose between a geometric and a linear model for data.
Before you start2 quick questions on what this builds on
Revise first: 1.2 Arithmetic sequences and series
Geometric sequences and the nth term
In 1.2 you added the same number each time. In you multiply by each time instead.
You find by dividing a term by the term in front of it. In a geometric sequence, every such quotient comes out the same.
can be a fraction or negative. has . has , so its signs alternate.
From to is steps, and each step multiplies by .
It's in the formula booklet. You need to know what , and mean in each question.
Try it first, then reveal one step at a time.
- Divide each term by the previous one: , and .
- The quotient never changes, so it is geometric: and .
- The 10th term is steps after the first: .
- Evaluate: , so .
- Sense check: is between and , so the terms keep shrinking, and is well below .
Questions often give two terms instead. Write each with the formula, then divide so cancels.
Try it first, then reveal one step at a time.
- Express both given terms using the formula: and .
- Divide the year-5 equation by the year-2 one, so cancels: .
- Take the cube root: , the only real value.
- Substitute back: , so tonnes.
- Interpret: means half of the pollutant is still there at the end of each year, a fall every year.
The sum of the first n terms
The total of a geometric sequence's terms is a . stands for the first terms added together.
Both forms are in the booklet. For between and , the second keeps both brackets positive.
With the terms are all and the total is . The formula would divide by .
Try it first, then reveal one step at a time.
- Read off the first term and ratio: and .
- As , the first form is easier: .
- Work it out: , so .
- Sense check: the 7th term alone is , a bit less than the total.
Try it first, then reveal one step at a time.
- An increase multiplies by , so the daily distances are geometric with and .
- Write down the sum you are finding, for the method mark: .
- Type it into your GDC with brackets: , so about km.
- Interpret: on day alone she rides km. The model only works while she can keep this up.
Sigma notation for geometric sums
Sigma notation from 1.2 works the same way: substitute each value of into the expression, then add.
In a geometric sum is in a power, as in . To evaluate one:
1. Substitute the lowest to get the first term.
2. When the power is plus or minus a fixed number, as here, the ratio is the number being raised to that power.
3. The number of terms is the top value minus the bottom value, plus . Then use , or your GDC's sum function.
Try it first, then reveal one step at a time.
- With and , term is .
- Locate in the sequence: gives , so .
- So the sum is . Check the ends: gives , and gives .
- Evaluate with the formula: .
Try it first, then reveal one step at a time.
- Write down what you enter: for from to .
- The GDC gives , so the sum is to 3 s.f.
- Check by formula. The first term is , the ratio is , and there are terms.
- So , which agrees.
Growth and decay in context
When something grows or shrinks by a fixed percentage every period, its values make a . The percentage tells you .
For example, up means , while down means , since remains.
Next, pin down . Is it the starting value, or the value one period later? Label the first few terms before using a formula.
You can also list the terms on a GDC or spreadsheet. When you use technology, still state and .
Try it first, then reveal one step at a time.
- A rise multiplies by , so the yearly salaries are geometric with and .
- The total for years is . Write it down: .
- Evaluate on your GDC: , so AUD.
- Sense check: years at the first salary is AUD, and the rises add about AUD on top.
Try it first, then reveal one step at a time.
- The weekly new cases are geometric with and , so .
- Write down the inequality, for the method mark: .
- Make a table of from in steps of . It shows and
- Week is the first above . Quoting both cross-over values shows why.
- Comment: recoveries and vaccination slow a real outbreak, so the model only suits the early weeks.
Exponential models and data
The term number sits in the exponent of . For and , that makes a geometric sequence an of , like the models in 2.5.
has and . Evaluating for gives exactly these terms, and the curve fills the gaps between them.
Models in context often start the clock at . If the question takes as the value at , then term is the value at . If is the value after one period, term is the value at .
Try it first, then reveal one step at a time.
- The first term is the value at : .
- Each extra year multiplies by , so .
- Term is the value at , so .
- The start of 2027 is , which is term : , so about fish.
- Interpret: means of the fish are left after each year, an fall per year.
Real data is rarely exactly geometric. Work out the gaps between neighbouring values, and their quotients. Steady gaps suggest a linear model; steady quotients suggest an exponential one.
So check before you fit a regression line (4.4). When the quotients stay about the same and are not close to , the points curve, and a straight line predicts badly.
Try it first, then reveal one step at a time.
- Differences: . The gaps increase every month, which rules out a good arithmetic fit.
- Ratios: , then about , and . These are all close to , which supports a geometric model.
- Estimate : four steps separate month from month , so and Keep the full value in your GDC.
- Month is steps after month : , about subscribers.
- Comment: month is outside the data, so this is extrapolation. Growth of a month can't last, so treat it as a rough estimate.
Common mistakes
- Raising to the power rather than . The 8th term is , because it is steps after .
- Using the percentage itself as . A fall leaves , so , not or .
- Rounding the ratio or an earlier answer too soon. Keep the full GDC value, or the final answer can come out wrong.
- Mixing units. If the terms are in centimetres and the target is in metres, convert one of them before you compare.
- Giving two values of , or rounding down. Give one whole number: the first that meets the condition.
Exam tips
- "Show that" a sequence is geometric: divide each consecutive pair you're given, then say the quotient is always the same. One quotient is not enough.
- With technology, write down , and what you entered, such as . That set-up earns the method marks; a bare answer scores only if it is right.
- "Find the least " or "which week": write the inequality, show the GDC solution or the two cross-over values from a table, then give a single whole number.
- "Comment" on a geometric model: refer to the model and the context, for example that counts are whole numbers, or that fixed-percentage growth can't go on for ever.
Key takeaways
Practise this
25 past-paper questions on Sequences and series in the AI HL bank, each with a mark scheme and a worked explanation.