Models of the particulate nature of matter cheat sheet

BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.

Models of the particulate nature of matter

IB CHEMISTRY · HL
pastpaperprep.com/revision-notes

1.1The particulate nature of matter

Element: one kind of atom, cannot be split chemically. Compound: elements bonded in a fixed ratio, with new properties. Mixture: not chemically combined, variable ratio, separable by physical methods.LEARN
Homogeneous mixture: uniform composition, one phase. Heterogeneous mixture: parts you can tell apart.LEARN
Filtration: insoluble solid. Evaporation: dissolved solid. Recrystallization: purify a solid. Distillation: liquids by boiling point. Paper chromatography: dissolved substances.LEARN
Endothermic: melting, vaporization, sublimation. Exothermic: freezing, condensation, deposition. State symbols: (s), (l), (g), (aq) = dissolved in water.LEARN
T (K)=t (∘C)+273.15T\ (\text{K}) = t\ ({}^{\circ}\text{C}) + 273.15. Average EkE_\text{k} is proportional to TT in kelvin, never in ∘C^{\circ}\text{C}.LEARN
At constant pressure, a pure substance's temperature stays constant while it changes state: the energy overcomes attractions between particles.LEARN

1.2The nuclear atom and isotopes

Proton: relative mass 1, charge +1+1. Neutron: relative mass 1, charge 0. Electron: negligible mass, charge −1-1. Protons and neutrons are in the tiny, dense nucleus; electrons are outside it.LEARN
number of neutrons=A−Z\text{number of neutrons} = A - ZLEARN
In XZAX2Z2AX\ce{^{A}_{Z}X}, protons =Z= Z. In an ion, electrons =Z−= Z - charge: subtract for a positive ion, add for a negative one.LEARN
Isotopes have the same number of protons and electrons but different numbers of neutrons. They have the same chemical properties but different physical properties.LEARN
Ar=∑(relative isotopic mass×percentage abundance)100A_\text{r} = \frac{\sum (\text{relative isotopic mass} \times \text{percentage abundance})}{100}LEARN
In an element's mass spectrum, each single-atom peak is an isotope: m/zm/z gives its mass and the height its abundance. If the heights don't total 100, divide by their sum.LEARN

1.3Emission spectra and energy levels

c=fλc = f\lambdaBOOKLET
E=hfE = hfBOOKLET
Shorter wavelength means higher frequency and more energy per photon. Visible light runs from red (about 700 nm\pu{700 nm}, least energy) to violet (about 400 nm\pu{400 nm}, most energy).LEARN
A continuous spectrum contains all wavelengths in a range; a line spectrum contains only certain wavelengths.LEARN
Emission line: an excited electron falls to a lower energy level and emits a photon whose energy equals the gap, Eupper−Elower=hfE_{\text{upper}} - E_{\text{lower}} = hf.LEARN
Hydrogen: falls to n=1n = 1 give ultraviolet, falls to n=2n = 2 give the visible lines, falls to n=3n = 3 give infrared. The lines converge at higher frequency because the levels converge.LEARN
maximum electrons in level n=2n2\text{maximum electrons in level } n = 2n^{2}LEARN

1.4Sublevels, orbitals and electron configurations

Sublevels s, p, d and f have 1, 3, 5 and 7 orbitals. Each orbital holds two electrons of opposite spin.LEARN
Filling order up to Z=36Z = 36: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p. Fill orbitals of a sublevel singly before pairing.LEARN
Exceptions: Cr is [Ar] 4s1 3d5\mathrm{[Ar]\,4s^{1}\,3d^{5}} and Cu is [Ar] 4s1 3d10\mathrm{[Ar]\,4s^{1}\,3d^{10}}.LEARN
d-block atoms lose their 4s electrons before their 3d electrons when they form positive ions.LEARN

1.5 ◆Ionization energy

first IE in kJ mol−1=hfNA1000\text{first IE in kJ mol}^{-1} = \frac{h f N_{\mathrm{A}}}{1000}LEARN
First ionization energy: X(g)→XX+(g)+eX−\ce{X(g) -> X^+(g) + e-}. The convergence limit of the series ending at the ground state (n=∞n = \infty to n=1n = 1 for hydrogen) corresponds to ionization.LEARN
Across a period first IE generally rises (more protons, similar shielding). Down a group it generally falls (outer electron further away and more shielded).LEARN
Dips: group 2 to 13 (electron leaves a higher-energy p sublevel) and group 15 to 16 (paired p electrons repel).LEARN
Successive IEs always rise. For a main-group element, the first big jump comes after the last outer-level electron: count the electrons before it to find the group.LEARN

1.6The mole and molar mass

Amount of substance, nn, is counted in moles. A mole of anything holds NAN_\text{A} elementary entities, about 6.02×10236.02 \times 10^{23}: always say which entity.LEARN
N=n×NAN = n \times N_\text{A}LEARN
ArA_\text{r} and MrM_\text{r} compare masses with one-twelfth of a carbon-12 atom, so they have no units. MrM_\text{r} is the sum of the ArA_\text{r} values in the formula.LEARN
Molar mass MM has the same number as MrM_\text{r}, in g mol−1\pu{g mol-1}.LEARN
n=mMn = \frac{m}{M}BOOKLET

1.7Empirical and molecular formulas

Empirical formula: the simplest whole-number ratio of atoms of each element. Molecular formula: the actual number of each atom in one molecule.LEARN
The molecular formula is nn times the empirical formula, where nn is a whole number (sometimes 1). Ionic compounds are not made of molecules, so they have no molecular formula.LEARN
% by mass of an element=number of its atoms×ArMr×100\%\ \text{by mass of an element} = \frac{\text{number of its atoms} \times A_\text{r}}{M_\text{r}} \times 100LEARN
Empirical formula from data: grams (100 g sample for percentages) →\to moles (÷Ar\div A_\text{r}) →\to divide by the smallest →\to whole numbers (multiply by 2 for .5, by 3 for .33 or .67, by 4 for .25 or .75).LEARN
n=MM(empirical formula)n = \frac{M}{M(\text{empirical formula})}LEARN

1.8Concentration and Avogadro's law

Molar concentration is moles of solute per dm3\pu{dm3} of solution, in mol dm−3\pu{mol dm-3}, written in square brackets: [X][\ce{X}].LEARN
n=CVn = CVBOOKLET
Convert cm3\pu{cm3} to dm3\pu{dm3} by dividing by 1000. Multiply mol dm−3\pu{mol dm-3} by MM to get g dm−3\pu{g dm-3}.LEARN
Dilution keeps the amount of solute the same: C1V1=C2V2C_1V_1 = C_2V_2.LEARN
A standard solution: weigh accurately, dissolve in distilled water, transfer with rinsings to a volumetric flask, make up to the mark, invert to mix.LEARN
Avogadro's law: equal volumes of gases at the same temperature and pressure hold equal numbers of molecules, so gas volume ratios equal mole ratios.LEARN

1.9Ideal gases

Ideal gas: particles in random motion, negligible particle volume, no intermolecular forces, elastic collisions.LEARN
Real gases deviate most at high pressure and low temperature. Under the same conditions, stronger intermolecular forces mean bigger deviations.LEARN
Fixed amount of gas: P∝1VP \propto \frac{1}{V} at constant TT; V∝TV \propto T at constant PP; P∝TP \propto T at constant VV, with TT in kelvin.LEARN
Molar volume at STP (273.15 K\pu{273.15 K}, 100 kPa\pu{100 kPa}): Vm=22.7 dm3 mol−1V_\text{m} = \pu{22.7 dm3 mol-1}, so n=VVmn = \frac{V}{V_\text{m}}.LEARN
PV=nRTPV = nRTBOOKLET
P1V1T1=P2V2T2\frac{P_1 V_1}{T_1} = \frac{P_2 V_2}{T_2}BOOKLET
In PV=nRTPV = nRT use SI units: Pa, m3\pu{m3}, K and mol, with R=8.31 J K−1 mol−1R = \pu{8.31 J K-1 mol-1}.LEARN

Which method when

Separate a mixture → use the property that differs: filter off an insoluble solid, evaporate to recover a dissolved solid, recrystallize to purify one, distil to keep a liquid (fractional for close boiling points), paper chromatography for dyes (1.1)LEARN
Protons, neutrons and electrons from XZAX2Z2AX\ce{^{A}_{Z}X} → protons =Z= Z, neutrons =A−Z= A - Z, electrons =Z= Z minus the charge (1.2)LEARN
ArA_\text{r} from isotope masses and abundances → weighted mean, ∑(mass×%)100\frac{\sum(\text{mass} \times \%)}{100}; for an unknown abundance, call it xx and the other 100−x100 - x (1.2)LEARN
Photon energy, or the gap between two levels, from a wavelength → λ\lambda in m, f=cλf = \frac{c}{\lambda}, then E=hfE = hf (1.3)LEARN
Electron configuration up to Z=36Z = 36 → fill 1s 2s 2p 3s 3p 4s 3d 4p, singly before pairing; Cr is [Ar] 4s1 3d5\mathrm{[Ar]\,4s^{1}\,3d^{5}} and Cu [Ar] 4s1 3d10\mathrm{[Ar]\,4s^{1}\,3d^{10}}; a d-block positive ion loses 4s before 3d (1.4)LEARN
Link mass, number of particles and a solution → go through moles: n=mMn = \frac{m}{M}, N=nNAN = nN_\text{A}, n=CVn = CV with VV in dm3\pu{dm3}; for a dilution C1V1=C2V2C_1V_1 = C_2V_2 (1.6, 1.8)LEARN
Empirical formula from percentages or masses → divide each mass by ArA_\text{r}, divide by the smallest, make whole numbers; molecular formula → multiply by n=MM(empirical formula)n = \frac{M}{M(\text{empirical formula})} (1.7)LEARN
Volumes of gases that react or form, all at the same TT and PP → volume ratio == coefficient ratio, gases only (1.8)LEARN
Gas amount, volume or molar mass → at STP n=VVmn = \frac{V}{V_\text{m}} with 22.7 dm3 mol−1\pu{22.7 dm3 mol-1}; otherwise PV=nRTPV = nRT in Pa, m3\pu{m3} and K, with M=mRTPVM = \frac{mRT}{PV}; a fixed amount changing conditions → P1V1T1=P2V2T2\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}, TT in kelvin (1.9)LEARN

◆Which method when

ArA_\text{r} from a mass spectrum → ∑(m/z×height)∑heights\frac{\sum(m/z \times \text{height})}{\sum \text{heights}}; divide by 100 only when the heights total 100 (1.2)LEARN
First ionization energy from a convergence limit → E=hfE = hf (find f=cλf = \frac{c}{\lambda} first for a wavelength), ×NA\times N_\text{A}, ÷1000\div 1000 for kJ mol−1\pu{kJ mol-1} (1.5)LEARN
Group of a main-group element from successive ionization energies → find the first very large jump; 1 or 2 electrons before it means group 1 or 2, 3 to 8 means add 10 (1.5)LEARN
Follows the IB Chemistry guide (first assessment 2025). Not affiliated with the IB.