Step-by-step solutions, with the mark-scheme points each step earns.
Q1Algebra4 marks
Both sides are non-negative, so square them to remove the moduli, then solve the quadratic and read off the inequality.
Square both sides.
(2x−1)2<9(x+1)2
B1
Expand and collect: 4x2−4x+1<9x2+18x+9, so a 3-term quadratic. Solve 5x2+22x+8=0.
(5x+2)(x+4)=0
M1
Critical values.
x=−4,x=−52
A1
5x2+22x+8>0 for x outside the roots (positive quadratic), so either x<−4 or x>−52.
A1
Answerx<−4 or x>−52
Watch outWriting the answer as −52<x<−4 (or using "and"); the solution is two separate regions.
Q2Complex numbers4 marks
Each inequality describes a region: a disc from the modulus condition and a wedge bounded by a half-line from the arg condition, so draw both boundaries and shade where they overlap.
∣z+1−i∣≤1 means ∣z−(−1+i)∣≤1: the distance from z to −1+i is at most 1. Mark the centre (−1,1) on the Argand diagram with some scale or label on the axes.
B1
Draw the circle of radius 1 about that centre. It touches the real axis at −1, and the whole disc lies in the upper half-plane.
B1
arg(z−1)=43π is a half-line starting at 1 (not the origin) going up and to the left at 135∘ to the positive real direction, so it lies along y=1−x with y>0. Draw it, crossing the circle.
B1
arg(z−1)≤43π includes everything below the real axis and the part above it that lies above this half-line. Inside the disc, shade only the segment of the circle on the upper side of the half-line.
B1
AnswerCircle of radius 1, centre −1+i; half-line from 1 at 135∘; shade the part of the disc above the half-line.
Watch outStarting the half-line at the origin instead of at 1, or shading the other side of it.
Q3Logarithmic and exponential functions5 marks
(a)3 marks
Take natural logs of both sides to turn the power of 3 into a multiple of y, then compare with Y=mX+c.
Take ln of x=A⋅3−y:
lnx=lnA−yln3
B1
Rearrange for y:
y=−ln31lnx+ln3lnA
This has the form y=mlnx+c, with m and c constants, so the graph of y against lnx is a straight line.
B1
The gradient is the coefficient of lnx: −ln31.
B1
AnswerLinear in y and lnx (form y=mlnx+c); gradient −ln31
(b)2 marks
The line meets the y-axis where lnx=0, so substitute lnx=0 and y=1.3.
Put lnx=0, y=1.3 in lnx=lnA−yln3:
0=lnA−1.3ln3⇒lnA=1.3ln3
M1
A=e1.3ln3=31.3=4.17 to 2 d.p. (use your calculator).
A1
AnswerA=4.17
Watch outSubstituting x=0 instead of lnx=0, which gives ln0, undefined.
Q4Integration5 marks
Write the integrand as 1×tan−1(x/2) and integrate by parts, differentiating the inverse tangent so the remaining integral is a simple logarithm.
Take u=tan−12x and dv=dx, so dxdu=1+x2/41⋅21=4+x22 and v=x. The integral becomes xtan−12x minus a multiple of ∫4+x2xdx.
M1
Substitute the derivative:
∫tan−12xdx=xtan−12x−∫4+x22xdx
A1
The numerator 2x is the derivative of 4+x2, so the remaining integral is ln(4+x2):
xtan−12x−ln(4+x2)
A1
Substitute the limits 2 and 0:
[2tan−11−ln8]−[0−ln4]=2π−ln8+ln4
M1dep
Combine the logarithms: −ln8+ln4=−ln2, so the value is 21π−ln2.
A1
Answer21π−ln2
Watch outLeaving tan−11 unevaluated or leaving several log terms instead of one.
Q5Complex numbers5 marks
Let the square root be a+ib, square it, and equate real and imaginary parts to get simultaneous equations in a and b.
Let (a+ib)2=10−46i. Since i2=−1, a2−b2+2abi=10−46i; equate real and imaginary parts.
M1
The two equations are:
a2−b2=10,2ab=−46
A1
Eliminate b using b=−a26: a2−a224=10.
M1
Multiply by a2 to get a quadratic in a2, and factorise:
a4−10a2−24=0⇒(a2−12)(a2+2)=0
A1
a2 is real and positive, so a2=12 and a=±23. Then b=−±2326=∓2. The roots are 23−2i and −23+2i.
A1
Answer±(23−2i)
Watch outUsing a2−b2=a−b, or giving only one of the two roots.
Q6Integration, Trigonometry7 marks
(a)3 marks
Write cosec and cot in terms of sin2θ and cos2θ, combine, then use double-angle formulae to reach tanθ.
Write the left side over a common denominator:
cosec2θ−cot2θ=sin2θ1−sin2θcos2θ=sin2θ1−cos2θ
B1
Use cos2θ=1−2sin2θ and sin2θ=2sinθcosθ:
2sinθcosθ1−(1−2sin2θ)=2sinθcosθ2sin2θ
M1
Cancel 2sinθ:
cosθsinθ=tanθ
A1
Answercosec2θ−cot2θ≡tanθ (shown)
(b)4 marks
Replace the integrand by tanθ using part (a), integrate, then substitute the limits with exact trig values.
By part (a) the integral is ∫π/4π/3tanθdθ, which equals
[−lncosθ]π/4π/3
M1
Substitute the limits 3π and 4π:
−lncos3π+lncos4π
M1dep
Insert the exact values cos3π=21 and cos4π=21:
−ln21+ln21
A1
Since ln21=−ln2 and ln21=−21ln2, the value is ln2−21ln2=21ln2.
A1
Answer21ln2 (shown)
Q7Differential equations7 marks
"Proportional" means a constant k is needed, so set up dy/dx=ky/x+1, separate variables and use both points to find k and the constant of integration.
The differential equation, with k a constant:
dxdy=x+1ky
B1
Separate the variables and integrate:
∫y1dy=∫x+1kdx
M1
The left side integrates to lny.
A1
The right side integrates to 2kx+1, so with a constant c:
lny=2kx+1+c
A1
Use (0,1) and (3,e):
0=2k+c,1=4k+c
M1dep
Subtract: 2k=1, so k=21 and c=−1.
A1
Then lny=x+1−1, so
y=exp(x+1−1)
A1
Answery=ex+1−1
Watch outForgetting the constant of proportionality k in the differential equation.
Q8Differentiation8 marks
Differentiate with the product rule, set the derivative to zero, and turn the equation into a quadratic in tanx using sec2x=1+tan2x.
Product rule on y=e−5xtan2x, with dxdtan2x=2tanxsec2x.
M1
The derivative:
dxdy=−5e−5xtan2x+2e−5xtanxsec2x
A1
Set it to zero and write sec2x=1+tan2x; this gives an equation in tanx:
e−5xtanx[−5tanx+2(1+tan2x)]=0
M1
Expanding the bracket gives the quadratic 2tan2x−5tanx+2=0 (or 2tan3x−5tan2x+2tanx=0 before cancelling).
A1
e−5x=0, so the factor tanx=0 gives the stationary point x=0.
B1
Factorise (2tanx−1)(tanx−2)=0, so tanx=21 or tanx=2. In radians (calculator), x=tan−121=0.464.
M1A1
x=tan−12=1.107. Both lie in −21π<x<21π and there are no others.
A1
Answerx=0, x=0.464, x=1.107
Watch outCancelling tanx and losing the stationary point at x=0.
Q9Algebra10 marks
(a)5 marks
The denominator has a linear factor and an irreducible quadratic factor, so use the form 2+xA+3+x2B+Cx.
Assume the form:
(2+x)(3+x2)14−3x+2x2=2+xA+3+x2B+Cx
B1
Multiply through: 14−3x+2x2=A(3+x2)+(B+Cx)(2+x). Put x=−2: 28=7A, so A=4.
M1A1
Compare x2 terms: 2=A+C, so C=−2.
A1
Compare constants: 14=3A+2B=12+2B, so B=1.
A1
Answer2+x4+3+x21−2x
(b)5 marks
Expand each partial fraction as a binomial series in x up to x2, then multiply out and add.
Write (2+x)−1=21(1+2x)−1 and use the binomial expansion.
M1
Expand the first fraction:
2+x4=2(1+2x)−1=2(1−21x+41x2)=2−x+21x2
A1
Expand the second fraction:
3+x21−2x=31(1−2x)(1+3x2)−1=31(1−2x)(1−31x2)
A1
Multiply out up to x2:
31(1−2x−31x2)=31−32x−91x2
M1
Add the two series: constant 2+31=37, x term −1−32=−35, x2 term 21−91=187.
A1
Answer37−35x+187x2
Q10Numerical solution of equations10 marks
(a)3 marks
Write the area of the two sectors and the area of the trapezium in terms of r and x, then equate sectors to 0.9 of the trapezium.
Drop the geometry onto AB: each sloping side projects rcosx along AB, so CD=2r−2rcosx.
B1
The two sectors each have radius r and angle x, so together their area is 2×21r2x=r2x. The trapezium has height rsinx and parallel sides 2r and CD. Sectors are 90% of the trapezium:
2×21r2x=20.9(2r+2r−2rcosx)rsinx
M1
Simplify the right side to 0.9r2(2−cosx)sinx and divide by r2:
x=0.9(2−cosx)sinx
A1
Answerx=0.9(2−cosx)sinx
(b)2 marks
Rewrite the equation as f(x)=x−0.9(2−cosx)sinx=0 and show f changes sign between 0.5 and 0.7 (calculator in radians).
In radians, f(0.5)=0.5−0.9(2−cos0.5)sin0.5=0.5−0.484…=0.016>0.
M1
f(0.7)=0.7−0.9(2−cos0.7)sin0.7=0.7−0.716…=−0.016<0. There is a sign change and f is continuous, so the root lies between 0.5 and 0.7.
A1
Answerf(0.5)≈0.016>0 and f(0.7)≈−0.016<0, so 0.5<x<0.7
Watch outWorking in degrees, which gives meaningless values.
(c)2 marks
If the sequence converges to x, then xn+1 and xn both tend to x, so substitute x for both and rearrange to the equation in (a).
At convergence xn+1=xn=x, so:
cosx=2−0.9sinxx
B1
Rearrange: 0.9sinxx=2−cosx, so multiplying by 0.9sinx (non-zero for 0<x<21π) gives the equation from (a).
x=0.9sinx(2−cosx)
B1
AnswerThe limit satisfies x=0.9(2−cosx)sinx, the equation in (a)
(d)3 marks
Start from a value in (0.5,0.7), iterate with the calculator in radians, and keep going until the second decimal place is settled; confirm with a sign change.
Take x0=0.5 and iterate in radians: x1=cos−1(2−0.9sin0.50.5)=0.5713.
The values are converging towards 0.62 to 2 d.p.: x=0.62.
A1
To justify it, check the sign change in (0.615,0.625) for f(x)=x−0.9(2−cosx)sinx: f(0.615)=0.0006>0 and f(0.625)=−0.0011<0, so the root rounds to 0.62.
A1
Answerx=0.62
Q11Vectors10 marks
(a)4 marks
Find both lengths from the components, then use a⋅b=∣a∣∣b∣cosθ to get the angle.
∣OA∣=22+(−1)2=5 and ∣OB∣=12+(−2)2=5, so OA=OB.
B1
Scalar product of OA=(2,−1,0) and OB=(0,1,−2):
OA⋅OB=2(0)+(−1)(1)+0(−2)=−1
M1
Divide by the product of the lengths and take the inverse cosine:
cosAOB=5×5−1=−51
M1
AOB=cos−1(−0.2)=101.5∘ (in degrees, as asked).
A1
AnswerOA=OB=5; angle AOB=101.5∘
Watch outGiving 78.5∘ (the acute angle from cos−10.2) because the minus sign was dropped.
(b)6 marks
P lies on line OM, so write it as a multiple of OM and use PA=7OA to get a quadratic in the multiplier.
M is the midpoint of AB: OM=21((2,−1,0)+(0,1,−2))=i−k.
B1
A general point on OM is OP=λ(i−k), so AP=OP−OA=(λ−2)i+j−λk.
M1
PA:OA=7:1 means ∣AP∣=7×5=35:
(λ−2)2+1+λ2=35
A1
Square: 2λ2−4λ+5=35, which reduces to:
λ2−2λ−15=0
A1
Factorise (λ−5)(λ+3)=0, so λ=5 or λ=−3, and substitute into λ(i−k).
M1dep
λ=5 gives 5i−5k; λ=−3 gives −3i+3k.
A1
AnswerOP=5i−5k or −3i+3k
Watch outFinding only λ=5 (or only λ=−3); there are two points on the line at that distance from A.