Part (a) turns the integrand into tan2θ, which has no direct integral; use tan2θ=sec2θ−1.
By part (a) the integrand is tan2θ. Use 1+tan2θ=sec2θ.
∫π/6π/3(sec2θ−1)dθ
M1
Integrate, since ∫sec2θdθ=tanθ.
[tanθ−θ]π/6π/3
A1
Substitute the limits, using tan3π=3 and tan6π=31.
(3−3π)−(31−6π)
M1
Combine: 3−31=32=323 and −3π+6π=−6π.
323−6π
A1
Answer323−61π
Watch outTrying to integrate tan2θ as 31tan3θ; the integral of sec2θ−1 is needed.
Q5Complex numbers7 marks
(a)2 marks
Apply the quadratic formula; the coefficients are complex, so i2=−1 is needed to simplify the discriminant.
With a=1, b=−2pi, c=−q:
z=22pi±(2pi)2+4q=22pi±−4p2+4q
M1
Divide through by 2 and take the factor 2 out of the root.
z=pi±q−p2
A1
Answerz=pi+q−p2 and z=pi−q−p2
(b)2 marks
The roots lie on the imaginary axis only when q−p2 is not real, so the quantity under the root must be negative.
The real part of each root is ±q−p2. For both roots to be on the imaginary axis (and distinct) this must be non-real, so the discriminant 4q−4p2 must be negative.
M1
So q−p2<0.
q<p2
A1
Answerq<p2
(c)3 marks
For an equilateral triangle the roots have real part ±q−p2 and imaginary part p, so use the 60∘ angle at O (or equal side lengths).
Here q>p2, so A and B are (±q−p2,p), symmetric about the imaginary axis. Triangle OAB is equilateral, so the argument of one root is 60∘ from the real axis.
M1
Use tan60∘=3 with imaginary part over real part.
q−p2p=3
A1
Square: p2=3(q−p2), so 3q=4p2.
q=34p2
A1
Answerq=34p2
Q6Differentiation8 marks
(a)5 marks
Find dxdy as dx/dtdy/dt and show that it is positive using the domain of x.
Differentiate x=ln(2+3t) with the chain rule.
dtdx=2+3t3
M1
Differentiate y=2+3tt with the quotient rule.
dtdy=(2+3t)2(2+3t)−3t=(2+3t)22
A1
Use dxdy=dtdy÷dtdx.
(2+3t)22×32+3t
M1
Simplify.
dxdy=3(2+3t)2
A1
x=ln(2+3t) is only defined when 2+3t>0, so the denominator 3(2+3t) is positive and the gradient is always positive.
A1
Answerdxdy=3(2+3t)2>0 because 2+3t>0 wherever the curve exists
(b)3 marks
The curve meets the y-axis where x=0; find that point, then the gradient there.
x=0 gives ln(2+3t)=0, so 2+3t=1 and t=−31. Then y=1−1/3=−31.
B1
The gradient at t=−31 is 3(1)2=32. Form the tangent through (0,−31).
y+31=32x
M1
Multiply by 3.
3y=2x−1
A1
Answer3y=2x−1
Q7Numerical solution of equations, Differentiation9 marks
(a)4 marks
The maximum is where dxdy=0; differentiate with the quotient rule, then undo the inverse tangent.
Quotient rule on y=xtan−1x, using dxdtan−1x=1+x21 and dxdx=2x1.
dxdy=xx⋅1+x21−tan−1x⋅2x1
M1A1
At M, dxdy=0 at x=a. Set the numerator to zero and multiply by 2a.
1+a2a=2atan−1a⇒tan−1a=1+a22a
M1
Take tan of both sides to remove the inverse tangent.
a=tan(1+a22a)
A1
Answera=tan(1+a22a) (given result)
(b)2 marks
Show that f(a)=a−tan(1+a22a) changes sign between 1.3 and 1.5, so a root lies between them. Use radians.
With your GDC in radian mode, evaluate f(1.3)=1.3−tan(2.692.6)=1.3−1.448=−0.148.
M1
f(1.5)=1.5−tan(3.253)=1.5−1.322=0.178. There is a sign change, so a lies between 1.3 and 1.5.
A1
Answerf(1.3)<0 and f(1.5)>0, so 1.3<a<1.5
(c)3 marks
Use the equation from (a) as an+1=tan(1+an22an) and iterate from a start in the interval until the second decimal place is settled.
Start with a1=1.4 and iterate in radian mode.
an+1=tan(1+an22an)
M1
The iterates are a2=1.3865, a3=1.3951, a4=1.3896, a5=1.3931, a6=1.3909, a7=1.3923, so a≈1.39.
A1
To justify 2 d.p., check the sign change of f(x)=x−tan(1+x22x) over (1.385,1.395): f(1.385)=−0.011<0 and f(1.395)=0.005>0.
A1
Answera=1.39 (2 d.p.)
Q8Vectors9 marks
(a)4 marks
The angle between two lines is the angle between their direction vectors, found from the scalar product.
Find AB=OB−OA.
AB=3−11−2−2−1=2−1−3
B1
Scalar product with the direction vector of l, 1−21.
2(1)+(−1)(−2)+(−3)(1)=2+2−3=1
M1
Divide by the product of the moduli, 4+1+9=14 and 1+4+1=6, then take the inverse cosine.
cosθ=1461
M1
Use your calculator: θ=cos−1841=83.7∘ (1.46 radians), which is acute.
A1
Answer83.7∘ (or 1.46 radians)
(b)5 marks
Write P in terms of λ and set AP2=BP2.
P is (2+λ,3−2λ,1+λ). Then AP and BP are as follows.
AP=1+λ1−2λλ,BP=−1+λ2−2λ3+λ
B1
AP=BP, so equate the squared moduli.
M1
Write the equation.
(1+λ)2+(1−2λ)2+λ2=(λ−1)2+(2−2λ)2+(λ+3)2
A1
Expand: 6λ2−2λ+2=6λ2−4λ+14. The λ2 terms cancel, so 2λ=12 and λ=6.
M1dep
Substitute λ=6: (2+6,3−12,1+6).
OP=8−97
A1
AnswerOP=8−97, i.e. 8i−9j+7k
Q9Differentiation, Integration10 marks
(a)5 marks
Differentiate with the product rule and set the derivative to zero.
Product rule on y=x−2/3lnx.
M1
Differentiate.
dxdy=xx−2/3−32x−5/3lnx
A1
Set to zero. Factorising x−5/3 (never zero for x>0) leaves 1−32lnx=0.
x−5/3(1−32lnx)=0⇒lnx=23
M1
Solve for x.
x=e3/2
A1
Substitute into y: x−2/3=e−1 and lnx=23.
y=e−1⋅23=2e3
A1
Answer(e3/2,2e3)
(b)5 marks
Integrate x−2/3lnx by parts, taking lnx as the part to differentiate.
Take u=lnx and dxdv=x−2/3, so v=3x1/3 and dxdu=x1. Then ∫udxdvdx=uv−∫vdxdudx gives
∫x−2/3lnxdx=3x1/3lnx−∫3x1/3⋅x1dx
M1
Take the constant 3 outside the remaining integral.
3x1/3lnx−3∫x1/3⋅x1dx
A1
Simplify x1/3⋅x1=x−2/3 and integrate, using ∫x−2/3dx=3x1/3.
3x1/3lnx−9x1/3
A1
Apply the limits 1 and 8, using 81/3=2 and ln1=0.
(6ln8−18)−(0−9)
M1dep
Use ln8=3ln2, so 6ln8=6×3ln2=18ln2.
18ln2−18+9=18ln2−9
A1
Answer18ln2−9 (given result)
Q10Algebra, Integration, Differential equations11 marks
Separate the variables, split x2(1+2x)1 into partial fractions, integrate, then use x=1, t=0 to find the constant.
Separate variables: ∫x2(1+2x)1dx=∫dt. Because of the repeated factor x2, use this partial-fraction form.
x2(1+2x)1=xA+x2B+1+2xC
B1
Multiply through by x2(1+2x) and substitute values.
1=Ax(1+2x)+B(1+2x)+Cx2
M1
x=0 gives B=1.
A1
x=−21 gives 1=4C, so C=4.
A1
Compare x2 coefficients: 0=2A+C, so A=−2.
A1
Integrate the partial fractions and separate: left side in x, right side t+c. Use ∫1+2x4dx=2ln(1+2x).