1. A spherical soap bubble is made of a thin film of soapy water. The bubble has an internal air pressure Pi and is formed in air of constant pressure Po. The theoretical prediction for the variation of (Pi - Po) is given by the equation g − = i o ( ) 4 P P R where γ is a constant for the thin film and R is the radius of the bubble. Data for (Pi - Po) and R were collected under controlled conditions and plotted as a graph showing the variation of (Pi - Po) with 1 R . 0.50 0.00 10.00 12.50 15.00 17.50 20.00 22.50 25.00 1.50 1.00 2.00 2.50 3.00 (Pi − Po) / Pa R –1 / m–1 (This question continues on the following page) Turn over (Question 1 continued) (a) Suggest whether the data are consistent with the theoretical prediction. [2] (b) (i) Show that the value of γ is about 0.03. [2] (ii) Identify the fundamental units of γ . [1] (iii) In order to find the uncertainty for γ , a maximum gradient line would be drawn. On the graph, sketch the maximum gradient line for the data. [1] (iv) The percentage uncertainty for γ is 15 %. State γ , with its absolute uncertainty. [2] (v) The expected value of γ is 0.027. Comment on your result. [1]
IB Physics SL · Paper practice
Paper 3 past paper questions
Every archived Physics SL Paper 3 question in one place. Practise them by topic, then sit a full paper under timed conditions.
Most-tested topicsRelativity, astrophysics and cosmology 110Waves, optics and imaging 58Foundations, measurement and data 36Mechanics and motion 26Thermal and energy systems 24Electricity, circuits and electromagnetism 9
You’re practising 2016–2020 papers. The 2021–2026 papers, including 2026, need a plan.
Unlock from $6/mo2. A student studies the relationship between the centripetal force applied to an object undergoing circular motion and its period T. The object (mass m) is attached by a light inextensible string, through a tube, to a weight W which hangs vertically. The string is free to move through the tube. A student swings the mass in a horizontal, circular path, adjusting the period T of the motion until the radius r is constant. The radius of the circle and the mass of the object are measured and remain constant for the entire experiment. r hollow plastic tube m W The student collects the measurements of T fi ve times, for weight W. The weight is then doubled (2W) and the data collection repeated. Then it is repeated with 3W and 4W. The results are expected to support the relationship W mr T 4 2 2 . (a) State why the experiment is repeated with different values of W. [1] In reality, there is friction in the system, so in this case W is less than the total centripetal force in the system. A suitable graph is plotted to determine the value of mr experimentally. The value of mr was also calculated directly from the measured values of m and r. (b) Predict from the equation whether the value of mr found experimentally will be larger, the same or smaller than the value of mr calculated directly. [2] (This question continues on the following page) Turn over (Question 2 continued) (c) (i) The measurements of T were collected five times. Explain how repeated measurements of T reduced the random error in the final experimental value of mr. [2] (ii) Outline why repeated measurements of T would not reduce any systematic error in T. [1]
3. (a) Maxwell’s equations led to the constancy of the speed of light. Identify what Maxwell’s equations describe. [1] (b) State a postulate that is the same for both special relativity and Galilean relativity. [1] (c) Two parallel current-carrying wires have equal currents in the same direction. There is an attractive force between the wires. (i) Identify the nature of the attractive force recorded by an observer stationary with respect to the wires. [1] (ii) A second observer moves at the drift velocity of the electron current in the wires. Discuss how this observer accounts for the force between the wires. [3] (Option A continues on the following page) (Option A continued)
Turn over 4. (a) The Lorentz transformations assume that the speed of light is constant. Outline what the Galilean transformations assume. [1] (b) A spaceship is travelling at 0.80c, away from Earth. It launches a probe away from Earth, at 0.50c relative to the spaceship. An observer on the probe measures the length of the probe to be 8.0 m. spaceship probe Earth (i) Deduce the length of the probe as measured by an observer in the spaceship. [2] (ii) Explain which of the lengths is the proper length. [2] (Option A continues on the following page) (Option A, question 4 continued) (c) Calculate the speed of the probe in terms of c, relative to Earth. [2]
5. The spacetime diagram is in the reference frame of an observer O on Earth. Observer O and spaceship A are at the origin of the spacetime diagram when time t = t' = 0. The worldline for spaceship A is shown. 2 4 0 0 2 4 6 8 10 8 10 6 ct / ly ct' x / ly (Option A continues on the following page) Turn over (Option A, question 5 continued) (a) (i) Calculate in terms of c the velocity of spaceship A relative to observer O. [1] (ii) Draw the x' axis for the reference frame of spaceship A. [1] (b) Event E is the emission of a flash of light. Observer O sees light from the flash when t = 9 years and calculates that event E is 4 ly away, in the positive x direction. (i) Plot the event E on the spacetime diagram and label it E. [2] (ii) Determine the time, according to spaceship A, when light from event E was observed on spaceship A. [3] End of Option A
6. A bar rotates horizontally about its centre, reaching a maximum angular velocity in six complete rotations from rest. The bar has a constant angular acceleration of 0.110 rad s–2. The moment of inertia of the bar about the axis of rotation is 0.0216 kg m2. (a) Show that the final angular velocity of the bar is about 3 rad s–1. [2] (b) Draw the variation with time t of the angular displacement θ of the bar during the acceleration. [1] / rad θ t / s (c) Calculate the torque acting on the bar while it is accelerating. [1] (Option B continues on the following page) Turn over (Option B, question 6 continued) (d) The torque is removed. The bar comes to rest in 30 complete rotations with constant angular deceleration. Determine the time taken for the bar to come to rest. [2] (Option B continues on the following page) (Option B continued)
7. The first diagram shows a person standing on a turntable which can rotate freely. The person is stationary and holding a bicycle wheel. The wheel rotates anticlockwise when seen from above. A B turntable can rotate freely The wheel is flipped, as shown in the second diagram, so that it rotates clockwise when seen from above. A B (a) Explain the direction in which the person-turntable system starts to rotate. [3] (Option B continues on the following page) (Option B, question 7 continued) (b) Explain the changes to the rotational kinetic energy in the person-turntable system. [2]
Turn over 8. A solid sphere of radius r and mass m is released from rest and rolls down a slope, without slipping. The vertical height of the slope is h. The moment of inertia I of this sphere about an axis through its centre is 2 5 2 mr . r h Show that the linear velocity v of the sphere as it leaves the slope is 10 7 gh . [3] (Option B continues on the following page) (Option B continued)
9. The diagram represents an ideal, monatomic gas that first undergoes a compression, then an increase in pressure. 5 0 0 1 2 3 4 5 6 1 2 3 4 Volume / 10–2 m3 Pressure / 105 Pa (a) Calculate the work done during the (i) compression. [1] (ii) increase in pressure. [1] (b) An adiabatic process then increases the volume of the gas to 5.0 × 10–2 m3. (i) Calculate the pressure following this process. [2] (Option B continues on the following page) Turn over (Option B, question 9 continued) (ii) Outline how an approximate adiabatic change can be achieved. [2] End of Option B
10. The diagram represents a diverging mirror being used to view an object. centre of the mirror object eye (a) Construct a single ray showing one path of light between the eye, the mirror and the object, to view the object. [2] (b) The image observed is virtual. Outline the meaning of virtual image. [1] (Option C continues on the following page) (Option C continued)
Turn over 11. A beam of monochromatic light from infinity is incident on a converging lens A. The diagram shows three wavefronts of the light and the focal point f of the lens. f direction of travel of wavefronts A (a) Draw on the diagram the three wavefronts after they have passed through the lens. [2] (b) Lens A has a focal length of 4.00 cm. An object is placed 4.50 cm to the left of A. Show by calculation that a screen should be placed about 0.4 m from A to display a focused image. [2] (Option C continues on the following page) (Option C, question 11 continued) (c) The screen is removed and the image is used as the object for a second diverging lens B, to form a final image. Lens B has a focal length of 2.00 cm and the final real image is 8.00 cm from the lens. Calculate the distance between lens A and lens B. [3] (d) Calculate the total magnification of the object by the lens combination. [2] (Option C continues on the following page) (Option C continued)
Turn over 12. (a) Outline the meaning of normal adjustment for a compound microscope. [1] (b) Sketch a ray diagram to find the position of the images for both lenses in the compound microscope at normal adjustment. The object is at O and the focal lengths of the objective and eyepiece lenses are shown. [4] fo fo fe fe O (Option C continues on the following page) (Option C continued)
13. A single pulse of light enters an optic fibre which contains small impurities that scatter the light. Explain the effect of these impurities on the pulse. [3] End of Option C
Turn over 14. (a) The astronomical unit (AU) and light year (ly) are convenient measures of distance in astrophysics. Define each unit. [2] AU: ly: (b) An image of a comet is shown. (i) Comets develop a tail as they approach the Sun. Identify one other characteristic of comets. [1] (ii) Identify one object visible in the image that is outside our Solar System. [1] (Option D continues on the following page) (Option D continued)
15. (a) Show that the apparent brightness b ∝AT d 4 2 , where d is the distance of the object from Earth, T is the surface temperature of the object and A is the surface area of the object. [1] (b) Two of the brightest objects in the night sky seen from Earth are the planet Venus and the star Sirius. Explain why the equation b ∝AT d 4 2 is applicable to Sirius but not to Venus. [2]
16. (a) The light from a distant galaxy shows that z = 0.11. Calculate the ratio size of the universe when the light was emitted size of the universe at present . [1] (b) Outline how Hubble’s law is related to z. [1] (Option D continues on the following page) (Option D continued)
Turn over 17. The data for the star Eta Aquilae A are given in the table. Value Mean luminosity 2630 L Mass 5.70 M Parallax angle 2.36 × 10-3 arcsec Apparent brightness 7.20 × 10-10 W m-2 L is the luminosity of the Sun and M is the mass of the Sun. (a) Show by calculation that Eta Aquilae A is not on the main sequence. [2] (b) Estimate, in pc, the distance to Eta Aquilae A (i) using the parallax angle in the table. [1] (ii) using the luminosity in the table, given that L = 3.83 × 1026 W. [3] (Option D continues on the following page) References: Q2. © International Baccalaureate Organization 2020. Q7. © International Baccalaureate Organization 2020. Q14. Comet P/Halley as taken March 8, 1986 by W. Liller, Easter Island, part of the International Halley Watch (IHW) Large Scale Phenomena Network. (Option D, question 17 continued) (c) Suggest why your answers to (b)(i) and (b)(ii) are different. [2] (d) Eta Aquilae A is a Cepheid variable. Explain why the brightness of Eta Aquilae A varies. [3] End of Option D
1. In an experiment to measure the acceleration of free fall a student ties two different blocks of masses m1 and m2 to the ends of a string that passes over a frictionless pulley. pulley 1 m 2 m The student calculates the acceleration a of the blocks by measuring the time taken by the heavier mass to fall through a given distance. Their theory predicts that 1 2 1 2 − = + m m a g m m and this can be re-arranged to give 1 2 1 2 + = − m m g a m m . (a) In a particular experiment the student calculates that a = (0.204 ±0.002) ms–2 using m1 = (0.125 ±0.001) kg and m2 = (0.120 ±0.001) kg. (i) Calculate the percentage error in the measured value of g. [3] (ii) Deduce the value of g and its absolute uncertainty for this experiment. [2] (This question continues on the following page) (Question 1 continued) (b) There is an advantage and a disadvantage in using two masses that are almost equal. State and explain, (i) the advantage with reference to the magnitude of the acceleration that is obtained. [2] (ii) the disadvantage with reference to your answer to (a)(ii). [2] Turn over M19/4/PHYSI/SP3/ENG/TZ1/XX
1. A student investigates the electromotive force (emf) ε and internal resistance r of a cell. r ε A V The current I and the terminal potential difference V are measured. For this circuit V = ε - Ir . The table shows the data collected by the student. The uncertainties for each measurement are shown. I / mA ± 1 mA V / V ± 0.02 V 97 1.55 193 1.50 304 1.45 395 1.40 487 1.35 598 1.30 (This question continues on the following page) (Question 1 continued) The graph shows the data plotted. 100 1.20 1.30 1.40 1.50 1.60 1.70 200 300 400 500 600 V / V I / mA 0 (a) The student has plotted error bars for the potential difference. Outline why no error bars are shown for the current. [1] (This question continues on page 5) Turn over M19/4/PHYSI/SP3/ENG/TZ2/XX Please do not write on this page. Answers written on this page will not be marked. M19/4/PHYSI/SP3/ENG/TZ2/XX (Question 1 continued) (b) Determine, using the graph, the emf of the cell including the uncertainty for this value. Give your answer to the correct number of significant figures. [3] (c) Outline, without calculation, how the internal resistance can be determined from this graph. [2] Turn over M19/4/PHYSI/SP3/ENG/TZ2/XX M19/4/PHYSI/SP3/ENG/TZ2/XX
1. A student investigates how the period T of a simple pendulum varies with the maximum speed v of the pendulum’s bob by releasing the pendulum from rest from different initial angles. A graph of the variation of T with v is plotted. 2.16 2.15 2.14 2.13 2.12 2.11 2.10 2.09 0.00 0.25 0.50 0.75 1.00 2.00 1.25 2.25 1.75 1.50 T / s v / m s–1 (a) Suggest, by reference to the graph, why it is unlikely that the relationship between T and v is linear. [1] (b) Determine the fractional uncertainty in v when T = 2.115 s, correct to one significant figure. [2] (This question continues on the following page) (Question 1 continued) (c) The student hypothesizes that the relationship between T and v is T = a + bv2, where a and b are constants. To verify this hypothesis a graph showing the variation of T with v2 is plotted. The graph shows the data and the line of best fit. 2.16 2.15 2.14 2.13 2.12 2.11 2.10 2.09 0 1 2 5 3 4 T / s v 2 / m2 s–2 Determine b, giving an appropriate unit for b. [3] (This question continues on page 5) Turn over N19/4/PHYSI/SP3/ENG/TZ0/XX Please do not write on this page. Answers written on this page will not be marked. N19/4/PHYSI/SP3/ENG/TZ0/XX (Question 1 continued) (d) The lines of the minimum and maximum gradient are shown. 2.16 2.15 2.14 2.13 2.12 2.11 2.10 2.09 0 1 2 5 3 4 T / s v 2 / m2 s–2 Estimate the absolute uncertainty in a. [2] Turn over N19/4/PHYSI/SP3/ENG/TZ0/XX
Paper 3: quick facts
Which topics come up most in IB Physics SL Paper 3?
The most-tagged topics in IB Physics SL Paper 3 are Relativity, astrophysics and cosmology (110), Waves, optics and imaging (58) and Foundations, measurement and data (36), out of 250 past-paper questions from 2016-2026. These are archive counts, not a prediction, and a question can carry more than one topic.
Are the IB Physics SL Paper 3 questions free?
158 of the 250 IB Physics SL Paper 3 questions are free to practise. The other 92 need a plan for IB Physics SL, from $6 a month.
Do the IB Physics SL Paper 3 questions have answers?
Yes. Each IB Physics SL Paper 3 question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.