5.2.1 · CorePaper 1Paper 2Paper 3Paper 4

Detection of radioactivity

Builds on 5.1.1 The atom17 min read

In a minute

is weak that is around you all the time, mostly from radon gas, rocks and buildings, food and drink, and cosmic rays. You measure ionising radiation with a detector connected to a counter, and give the in counts/s or counts/minute. Extended adds the : the reading minus the background.

You'll be able to

  • State what background radiation is.
  • Name the four sources that give most of the background radiation, and tell them apart from things that are not sources.
  • Describe how a detector connected to a counter measures ionising radiation.
  • Calculate a count rate in counts/s or counts/minute, and convert between the two.
  • Use a measured background count rate to work out the corrected count rate of a source.
Before you start2 quick questions on what this builds on
Check yourself
What is at the centre of an atom?
Check yourself
A neutral atom loses one electron. What does it become?

Revise first: 5.1.1 The atom

Background radiation and where it comes from

Some nuclei are unstable. An unstable gives out radiation by itself to become more stable. This is .

This radiation can knock electrons out of the atoms it passes, turning them into ions. That makes it . It can damage living cells.

Most background radiation is natural. Four sources make the biggest contribution:

1. Radon gas in the air. Radon is a radioactive gas that seeps out of the ground from rocks such as granite. It is usually the largest single source.

2. Rocks and buildings. Rocks, soil, bricks and concrete contain small amounts of radioactive elements.

3. Food and drink. They contain tiny amounts of radioactive isotopes, so radiation also comes from inside your own body.

4. Cosmic rays. These are high-energy particles from space, from the Sun and from deeper in space. The atmosphere absorbs much of them, so you receive more at high altitude, for example in an aircraft.

A small part comes from human activity: medical X-rays and treatments, waste from nuclear power stations and old nuclear weapons tests.

Mobile phones, radio and TV transmitters, microwave ovens and visible light are not sources of background radiation. Their radiation is not ionising.

Worked exampleA student switches on a radiation detector in a room with no radioactive source in it. The counter still records counts. State what causes these counts and name two natural sources of it.

Try it first, then reveal one step at a time.

  1. Name the radiation that is always present, then pick two from the four main natural sources.
Check yourself
Which of these does not add to background radiation?
Check yourself
Which list contains only natural sources of background radiation?

Detector, counter and count rate

To measure ionising radiation, you connect a detector to a counter. The detector is often a Geiger–Müller tube. Each time it detects ionising radiation, it sends a small electrical pulse to the counter.

The counter adds up the pulses. Each pulse is one count.

A radioactive source sits on the bench at the left. A short distance to its right is a detector: a Geiger–Müller tube, a long thin cylinder with a thin window at the end that faces the source. A cable joins the other end of the tube to a counter, a box on the right with a digital display showing the number of counts so far. source detector (Geiger–Müller tube) thin window counter 00 417 start/stop reset cable
The detector sends a pulse for each detection; the counter adds them up.

To measure background radiation alone, you use just the detector and the counter, with every radioactive source taken away.

The number of counts depends on how long you count. So you compare readings using the : the number of counts in each second or each minute.

Learn this
count rate=number of countstime taken\text{count rate} = \frac{\text{number of counts}}{\text{time taken}}

Count rate is measured in counts/s or counts/minute. There are 60 seconds in a minute, so a count rate in counts/minute is 60 times the same rate in counts/s.

Worked exampleA counter connected to a detector records 14401440 counts in 4.04.0 minutes. Calculate the count rate in counts/s.

Try it first, then reveal one step at a time.

  1. Change the time to seconds: 4.0×60=240 s4.0 \times 60 = 240\ \text{s}.

Radioactive emission is random. Even with nothing changed, the counter records a slightly different number of counts in each minute.

So one short reading is not reliable. Count for a long time, or repeat the reading and take the average.

Worked exampleWith no source nearby, a student records the counts in three separate 2.02.0-minute intervals: 4141, 5252 and 4848. Calculate the average background count rate in counts/minute.

Try it first, then reveal one step at a time.

  1. Add the counts: 41+52+48=14141 + 52 + 48 = 141 counts.
Check yourself
A counter records 19501950 counts in 5.05.0 minutes. What is the count rate in counts/s?
Check yourself
A detector is left on a bench with no source nearby. In four one-minute intervals the counter records 1919, 2727, 2222 and 2525 counts. Why do the readings differ?

Corrected count rate Extended only

When a detector is near a source, it counts radiation from the source and from the background together. The reading is too high for the source alone.

To find the source's own count rate, take the source away and record the background count rate on its own. Then take that away from the reading you got with the source in place. The result is the .

Learn this
corrected count rate=measured count rate−background count rate\text{corrected count rate} = \text{measured count rate} - \text{background count rate}

Both rates must be in the same unit before you subtract. You need the corrected count rate whenever you study the source itself, for example to find a half-life in 5.2.4.

Worked exampleA detector held near a source gives 486486 counts/minute. With the source removed, it gives 3434 counts/minute. Calculate the corrected count rate.

Try it first, then reveal one step at a time.

  1. The 3434 counts/minute is the background, so subtract it.
Worked exampleA student measures the background three times, for 5.05.0 minutes each time, and records 121121, 133133 and 116116 counts. She then places a source near the detector and records 15861586 counts in 2.02.0 minutes. Calculate the corrected count rate of the source in counts/minute.

Try it first, then reveal one step at a time.

  1. Background: 121+133+116=370121 + 133 + 116 = 370 counts in 1515 minutes, so 37015=24.67\frac{370}{15} = 24.67 counts/minute. Keep this value unrounded.
Check yourself
A counter near a source records 12601260 counts in 5.05.0 minutes. The background count rate is 0.40 counts/s0.40\ \text{counts/s}. What is the corrected count rate?
Check yourself
A student wants the count rate due to a source alone. What should she do?

Common mistakes

  • Naming mobile phones, microwaves or radio masts as sources of background radiation. Their radiation is not ionising.
  • Writing the unit of count rate the wrong way up, as minutes/count. Count rate is counts divided by time.
  • Converting counts/minute to counts/s by multiplying by 60. A rate per second is smaller, so divide by 60.
  • Thinking a background reading that changes from minute to minute means the detector is faulty. Radioactive emission is random.
  • Extended: adding the background count rate instead of subtracting it, or subtracting a rate in counts/s from one in counts/minute.

Exam tips

  • "State" what background radiation is with both ideas: it is ionising radiation, and it is present all the time.
  • Paper 1/2 multiple choice on sources: cross out any option containing a non-ionising source (phones, microwaves, radio) or, if the question asks for natural sources, anything made by people.
  • "Calculate" a count rate: write counts ÷ time with your numbers in, and give the unit, counts/s or counts/minute, that matches the time you used.
  • Extended: in a corrected count rate question, check whether the background is given as a count or a rate, and per second or per minute, before you subtract.

Key takeaways

Learn thisBackground radiation is the ionising radiation present around us all the time.
Learn thisMost background radiation comes from four sources: radon gas, which is in the air; rocks and buildings; what we eat and drink; and cosmic rays.
Learn thisIonising radiation is measured with a detector (such as a Geiger–Müller tube) connected to a counter.
Learn thisCount rate = number of counts ÷ time taken, in counts/s or counts/minute. Multiply a rate in counts/s by 60 to get counts/minute. Readings vary at random, so count for longer or average repeats.
Learn thisCorrected count rate = measured count rate − background count rate, with both in the same unit.

Practise this

13 past-paper questions on Detection of radioactivity in the 0625 Extended bank, each with a mark scheme and a worked explanation.

Practise Detection of radioactivity →