3.8 · AHL · HL onlyPaper 1Paper 2

Unit-circle trigonometry and equations

In a minute

The defines sine and cosine for any angle, which explains the graphs of sin⁡x\sin x and cos⁡x\cos x, the and tan⁡θ=sin⁡θcos⁡θ\tan\theta = \frac{\sin\theta}{\cos\theta}. It also explains the of the , where two triangles can fit the same data. You solve trigonometric equations by finding where graphs cross on your GDC.

You'll be able to

  • Define cos⁡θ\cos\theta and sin⁡θ\sin\theta for any angle with the , and explain how the graphs of sin⁡x\sin x and cos⁡x\cos x come from it.
  • Use cos⁡2θ+sin⁡2θ=1\cos^{2}\theta + \sin^{2}\theta = 1 to find one ratio from another, choosing the sign from where the angle lies.
  • Use tan⁡θ=sin⁡θcos⁡θ\tan\theta = \frac{\sin\theta}{\cos\theta} as the gradient of a line through the origin.
  • Decide whether two sides and an angle not between them give two triangles, one or none, and find each one.
  • Solve a trigonometric equation in a given interval by graphing both sides on your GDC, using calculator values rather than exact values.
Before you start3 quick questions on what this builds on
Check yourself
In triangle ABC, a=14a = 14 cm, b=9b = 9 cm and A^=70∘\hat{A} = 70^{\circ}. Find B^\hat{B}.
Check yourself
Convert 135∘135^{\circ} to . Give your answer to 3 s.f.
Check yourself
Write down the , in degrees, of y=4sin⁡(3x)+1y = 4\sin(3x) + 1.

Revise first: 2.5 Modelling with functions, 3.2 Triangle trigonometry and 3.7 Radians, arc length and sector area

Sine and cosine on the unit circle

In 3.2 sine and cosine came from right-angled triangles, so the angle had to be acute. A turbine blade, a wheel or a tide turns through any angle. A circle lets you define sine and cosine for all of them.

Draw the : centre the origin OO, radius 11. Start at (1,0)(1, 0) and turn anticlockwise through an angle θ\theta (theta). Call the point you reach PP. A negative angle means you turn clockwise.

For an acute angle this matches SOH CAH TOA. Drop a line from PP to the xx-axis: the right-angled triangle has hypotenuse 11. So cos⁡θ=adjacent1\cos\theta = \frac{\text{adjacent}}{1} and sin⁡θ=opposite1\sin\theta = \frac{\text{opposite}}{1}.

The signs come from where PP is. Between 90∘90^{\circ} and 180∘180^{\circ}, PP is left of the yy-axis, so cos⁡θ<0\cos\theta < 0, but above the xx-axis, so sin⁡θ>0\sin\theta > 0. Between 180∘180^{\circ} and 270∘270^{\circ} both are negative. Between 270∘270^{\circ} and 360∘360^{\circ} only cos⁡θ\cos\theta is positive.

Worked examplePP is the point on the unit circle at an angle of 215∘215^{\circ} from the positive xx-axis. Find the coordinates of PP, to 3 s.f., and explain their signs.

Try it first, then reveal one step at a time.

  1. By the definition, P=(cos⁡215∘,sin⁡215∘)P = (\cos 215^{\circ}, \sin 215^{\circ}). Check your GDC is in degree mode.

A circle of radius rr is the unit circle enlarged by a factor of rr. So the point at angle θ\theta is (rcos⁡θ,rsin⁡θ)(r\cos\theta, r\sin\theta). This is how you model anything that turns.

Worked exampleThe hub of a wind turbine is 5050 m above the ground and each blade is 2828 m long. Take the hub as the origin, with θ\theta measured anticlockwise from the horizontal. (a) Find the height of a blade tip above the ground when θ=250∘\theta = 250^{\circ}. Give your answer to 3 s.f. (b) Interpret the sign of sin⁡250∘\sin 250^{\circ} in this context.

Try it first, then reveal one step at a time.

  1. (a) The tip is at (28cos⁡θ,28sin⁡θ)(28\cos\theta, 28\sin\theta) from the hub, so it is 28sin⁡θ28\sin\theta m above the hub.

Now let θ\theta run from 00 to 2π2\pi (one full turn). Plot the height of PP against θ\theta and you get the graph of y=sin⁡xy = \sin x. Plot the distance across and you get y=cos⁡xy = \cos x.

From the circle to the graphsDrag the slider
cossinπ/2π3π/22π1−1y = sin xy = cos x
2.20 rad

θ = 126°

cos θ = −0.589

sin θ = 0.808

The height of the point on the circle is sin θ and its distance along is cos θ. Each is the matching graph's value at x = θ.

The picture explains the graphs' features. PP never goes above 11 or below −1-1, so both graphs stay between −1-1 and 11. After one full turn, PP is back where it started, so both graphs repeat with 2π2\pi, or 360∘360^{\circ}. This is why sine and cosine model repeating patterns, the of 2.5.

Exact values such as sin⁡30∘=12\sin 30^{\circ} = \frac{1}{2} are not examined in this course: you use your GDC. Some values still help you picture the graphs. The points (1,0)(1, 0), (0,1)(0, 1), (−1,0)(-1, 0) and (0,−1)(0, -1) give sin⁡90∘=1\sin 90^{\circ} = 1, cos⁡180∘=−1\cos 180^{\circ} = -1 and the zeros of each graph.

Check yourself
Find the xx-coordinate of the point on the unit circle at 160∘160^{\circ} from the positive xx-axis. Give your answer to 3 s.f.
Check yourself
As θ\theta increases from 90∘90^{\circ} to 180∘180^{\circ}, what happens to sin⁡θ\sin\theta?

The Pythagorean identity and tangent

P(cos⁡θ,sin⁡θ)P(\cos\theta, \sin\theta) is 11 unit from OO. Pythagoras on the triangle under OPOP gives x2+y2=1x^{2} + y^{2} = 1. Putting in PP's coordinates gives an identity: an equation that is true for every angle.

In the formula booklet
cos⁡2θ+sin⁡2θ=1\cos^{2}\theta + \sin^{2}\theta = 1

This is the , and it is in the formula booklet. cos⁡2θ\cos^{2}\theta means (cos⁡θ)2(\cos\theta)^{2}. It turns one ratio into the other: sin⁡2θ=1−cos⁡2θ\sin^{2}\theta = 1 - \cos^{2}\theta.

Square-rooting gives two signs. Decide the sign from where PP lies. Every angle in a triangle is between 0∘0^{\circ} and 180∘180^{\circ}, so PP is above the xx-axis and its sine is positive.

Worked exampleA triangular flower bed PQR has PQ=6.4\text{PQ} = 6.4 m and QR=8.5\text{QR} = 8.5 m. The angle at Q is obtuse, with cos⁡Q=−0.28\cos Q = -0.28. (a) Use the Pythagorean identity to find sin⁡Q\sin Q, and explain your choice of sign. (b) Find the area of the bed, to 3 s.f.

Try it first, then reveal one step at a time.

  1. (a) sin⁡2Q=1−cos⁡2Q=1−(−0.28)2=1−0.0784=0.9216\sin^{2}Q = 1 - \cos^{2}Q = 1 - (-0.28)^{2} = 1 - 0.0784 = 0.9216.
Check yourself
An angle θ\theta has 270∘<θ<360∘270^{\circ} < \theta < 360^{\circ} and cos⁡θ=0.45\cos\theta = 0.45. Find sin⁡θ\sin\theta, to 3 s.f.

The line OPOP joins (0,0)(0, 0) to (cos⁡θ,sin⁡θ)(\cos\theta, \sin\theta). Its gradient is rise over run, sin⁡θcos⁡θ\frac{\sin\theta}{\cos\theta}. For an acute angle this is oppositeadjacent\frac{\text{opposite}}{\text{adjacent}}, the tan⁡θ\tan\theta you already know. So this defines tan⁡θ\tan\theta for any angle.

In the formula booklet
tan⁡θ=sin⁡θcos⁡θ\tan\theta = \frac{\sin\theta}{\cos\theta}

It is in the formula booklet. When cos⁡θ=0\cos\theta = 0, at 90∘90^{\circ} and 270∘270^{\circ}, OPOP is vertical and tan⁡θ\tan\theta is undefined. tan⁡θ\tan\theta is positive when sine and cosine have the same sign, and negative when they differ.

Worked exampleA straight path leaves a park gate OO. Take the xx-axis pointing east and the yy-axis north, in metres. The path makes an angle θ\theta anticlockwise from east, where 90∘<θ<180∘90^{\circ} < \theta < 180^{\circ} and cos⁡θ=−0.6\cos\theta = -0.6. (a) Find sin⁡θ\sin\theta and tan⁡θ\tan\theta. (b) Find the equation of the path. (c) Interpret its gradient.

Try it first, then reveal one step at a time.

  1. (a) sin⁡2θ=1−(−0.6)2=0.64\sin^{2}\theta = 1 - (-0.6)^{2} = 0.64. Between 90∘90^{\circ} and 180∘180^{\circ} the sine is positive, so sin⁡θ=0.8\sin\theta = 0.8.
Check yourself
A point PP on the unit circle is (0.8824,−0.4706)(0.8824, -0.4706). Find tan⁡θ\tan\theta, the gradient of OPOP, to 3 s.f.

The ambiguous case of the sine rule

Reflect PP in the yy-axis. The new point is at 180∘−θ180^{\circ} - \theta and has the same height. So sin⁡(180∘−θ)=sin⁡θ\sin(180^{\circ} - \theta) = \sin\theta: an acute angle and an obtuse angle share each sine between 00 and 11.

Your GDC's sin⁡−1\sin^{-1} gives only the acute one. When the gives you sin⁡C\sin C, the obtuse angle 180∘−C180^{\circ} - C is a second candidate. If both fit, two different triangles match the data. This is the .

It can only happen when you know two sides and an angle that is not between them. Picture the angle at A and the side next to it as fixed. The third side swings like a gate from the far end, and it can meet the other arm of the angle in two places.

A quick test: if aa, the side facing the known angle, is longer than cc, then CC is smaller than A^\hat{A}. So CC can't be obtuse, and there is exactly one triangle.

Fence AB of 120 m along the bottom. A hedge leaves A at 35 degrees to the fence. A dashed arc of radius 80 m centred at B cuts the hedge at two points, C1 far from A and C2 close to A, so two triangles fit the measurements. A B 35° 120 m hedge C₁ 80 m C₂ 80 m
An 8080 m side from B meets the hedge twice: at C1C_{1} and at C2C_{2}.
Worked exampleA straight fence AB is 120120 m long. A straight hedge leaves A at 35∘35^{\circ} to the fence. A post C on the hedge is 8080 m from B. (a) Find the two possible sizes of the angle AC^B\text{A}\hat{\text{C}}\text{B}. (b) Find the two possible distances AC, in metres, to 3 s.f. (c) Explain what the two answers mean.

Try it first, then reveal one step at a time.

  1. (a) BC =80= 80 faces the 35∘35^{\circ} angle and AB =120= 120 faces C. Sine rule: sin⁡C120=sin⁡35∘80\frac{\sin C}{120} = \frac{\sin 35^{\circ}}{80}, so sin⁡C=120sin⁡35∘80=0.8603…\sin C = \frac{120\sin 35^{\circ}}{80} = 0.8603\ldots.
Worked exampleA ferry route leaves port A at 48∘48^{\circ} to the straight coastline AB, where AB=7.2\text{AB} = 7.2 km. An island C on the route is 9.59.5 km from B. Find the angle AC^B\text{A}\hat{\text{C}}\text{B}, and explain why there is only one possible answer.

Try it first, then reveal one step at a time.

  1. Sine rule: sin⁡C7.2=sin⁡48∘9.5\frac{\sin C}{7.2} = \frac{\sin 48^{\circ}}{9.5}, so sin⁡C=7.2sin⁡48∘9.5=0.5632…\sin C = \frac{7.2\sin 48^{\circ}}{9.5} = 0.5632\ldots.
Check yourself
Triangle XYZ is to have X^=52∘\hat{X} = 52^{\circ}, XY=10\text{XY} = 10 cm and YZ=7\text{YZ} = 7 cm. How many triangles fit these measurements?
Check yourself
In triangle DEF, D^=28∘\hat{D} = 28^{\circ}, DE=15\text{DE} = 15 cm and EF=9\text{EF} = 9 cm. The angle at F is obtuse. Find F^\hat{F}.

Solving trigonometric equations with graphs

Your GDC gives sin⁡−1(0.35)=0.357…\sin^{-1}(0.35) = 0.357\ldots radians. But the sine graph repeats, so it reaches 0.350.35 again and again. A trigonometric equation can have many solutions, which is why a question always gives an interval, such as 0≤x≤2π0 \le x \le 2\pi.

Solving f(x)=g(x)f(x) = g(x) means finding where the graphs y=f(x)y = f(x) and y=g(x)y = g(x) cross. Each crossing inside the interval is one solution. This works for any equation, including ones with no algebraic method, such as sin⁡x=0.2x\sin x = 0.2x.

1. Set the angle mode to match the interval: degrees if it is in degrees, radians otherwise.

2. Graph both sides, with a window that covers the whole interval.

3. Count the crossings, then find each one with the intersection tool.

4. Write down the equation you graphed, then every solution in the interval.

Worked exampleSolve sin⁡x=0.35\sin x = 0.35 for 0≤x≤2π0 \le x \le 2\pi. Give your answers to 3 s.f.

Try it first, then reveal one step at a time.

  1. The interval is in radians, so set radian mode. Graph y=sin⁡xy = \sin x and y=0.35y = 0.35 for 0≤x≤2π0 \le x \le 2\pi.

In models, the variable is usually time. The angle is in degrees in 2.5; in 2.9 it is in radians unless a degree sign is shown, so set the mode to match. The method is the same: graph the model and a horizontal line at the value you want.

Graph of water depth d against time t from 0 to 12 hours. The curve starts at 7.7 m, falls to 2.5 m at t = 6 and rises back to 7.7 m at t = 12. The horizontal line d = 6.5 crosses it twice, near t = 1.91 and t = 10.1. The curve is above the line before the first crossing and after the second. 036 912 t (hours after midnight) 258 d (m) d = 6.5 1.9110.1
The depth is at least 6.56.5 m in the shaded times.
Worked exampleThe depth of water in a harbour is modelled by d(t)=2.6cos⁡(30t)+5.1d(t) = 2.6\cos(30t) + 5.1, where dd is in metres, tt is the time in hours after midnight, 0≤t≤120 \le t \le 12, and the angle is in degrees. A boat needs a depth of at least 6.56.5 m. (a) Use your GDC to solve d(t)=6.5d(t) = 6.5. Give your answers to 3 s.f. (b) Hence state when the boat can use the harbour.

Try it first, then reveal one step at a time.

  1. (a) Set degree mode. Write down the equation: 2.6cos⁡(30t)+5.1=6.52.6\cos(30t) + 5.1 = 6.5.
Check yourself
How many solutions does cos⁡x=−0.6\cos x = -0.6 have for 0∘≤x≤540∘0^{\circ} \le x \le 540^{\circ}?
Check yourself
Use your GDC to solve sin⁡x=0.2x\sin x = 0.2x for 0<x≤2π0 < x \le 2\pi. Give your answer to 3 s.f.

Common mistakes

  • Working in the wrong angle mode. Check DEG or RAD against the question before every calculation: an interval in π\pi means radians.
  • Giving only the angle sin⁡−1\sin^{-1} returns. In the ambiguous case test 180∘180^{\circ} minus it, and in an equation look for every crossing in the interval.
  • Keeping ++ after a square root from the Pythagorean identity. Decide the sign from where PP is on the circle.
  • Rounding sin⁡C\sin C or an angle and then reusing it. Store the full GDC value and round only the final answer.
  • Writing GDC answers with no working. Write the equation you graphed; that line can earn the method mark even if a value is wrong.

Exam tips

  • "Solve" with a GDC: write the equation you entered, then give every solution in the interval to 3 s.f. (angles in degrees to 1 d.p.) unless told otherwise, with units in context.
  • "Sketch" a sine or cosine graph: start and end points, maximums, minimums and zeros in the right places across the given domain.
  • "Show that" with the Pythagorean identity: write the step where you replace cos⁡2θ+sin⁡2θ\cos^{2}\theta + \sin^{2}\theta by 11. Using the identity is a method mark, and the last line must match the given result.
  • "Find the two possible values" of an angle or side points to the ambiguous case: give both, and say which fits any extra fact you are given.

Key takeaways

Learn thisOn the unit circle, the point at angle θ\theta anticlockwise from the positive xx-axis is (cos⁡θ,sin⁡θ)(\cos\theta, \sin\theta). On a circle of radius rr centred at the origin it is (rcos⁡θ,rsin⁡θ)(r\cos\theta, r\sin\theta).
Learn thissin⁡x\sin x and cos⁡x\cos x stay between −1-1 and 11 and repeat every 360∘360^{\circ} (2π2\pi radians).
In bookletcos⁡2θ+sin⁡2θ=1\cos^{2}\theta + \sin^{2}\theta = 1
In booklettan⁡θ=sin⁡θcos⁡θ\tan\theta = \frac{\sin\theta}{\cos\theta}
Learn thistan⁡θ\tan\theta is the gradient of OPOP; it is undefined when cos⁡θ=0\cos\theta = 0. After a square root, choose the sign of sin⁡θ\sin\theta or cos⁡θ\cos\theta from where PP lies; in a triangle sin⁡θ>0\sin\theta > 0.
Learn thisAmbiguous case (two sides and an angle not between them): if the sine rule gives sin⁡C=k\sin C = k with 0<k<10 < k < 1, test both C1=sin⁡−1kC_{1} = \sin^{-1}k and 180∘−C1180^{\circ} - C_{1}; keep each one whose sum with the known angle is under 180∘180^{\circ}. If k=1k = 1, C=90∘C = 90^{\circ}; if k>1k > 1 there is no triangle.
Learn thisSolve a trigonometric equation in an interval by graphing both sides in the right angle mode over the whole interval, then finding every intersection.

Practise this

3 past-paper questions on Further trigonometry and identities in the AI HL bank, each with a mark scheme and a worked explanation.

Practise Further trigonometry and identities →