Step-by-step solutions, with the mark-scheme points each step earns.
Q1Algebra4 marks
Sketch y=2∣x−3∣ and the line y=2−5x: the line is above the V only to the left of their intersection, so find that intersection.
Sketch y=2∣x−3∣ as a V with vertex at (3,0) and y=2−5x as a line sloping steeply downwards. They cross once, to the left of x=3.
B1
At the crossing the V is on its left branch, y=2(3−x), so solve 2−5x=−2(x−3).
M1
This gives 2−5x=6−2x, so −3x=4:
x=−34
A1
The line is above the V for x less than this value, so 2−5x>2∣x−3∣ when x<−34.
A1
Answerx<−34
Watch outGiving the answer as x<−1.33 or using ≤ instead of <, both of which lose the final mark.
Q2Complex numbers4 marks
∣z−w∣=r is a circle centre w radius r, so rewrite ∣z−1+i∣ as ∣z−(1−i)∣ and read off each region.
∣z∣≥2 is the boundary circle with centre the origin and radius 2, with the region outside it. Draw this circle.
B1
∣z−1+i∣=∣z−(1−i)∣, so the second circle is centred at the point representing 1−i, that is (1,−1). Mark this point.
B1
∣z−1+i∣≤1 is the circle with centre (1,−1) and radius 1, with the region inside it. Draw this circle.
B1
Shade the points that are both outside the circle centre O radius 2 and inside the circle centre (1,−1) radius 1. This is the part of the small disc lying beyond the large circle.
B1
AnswerA circle centre O radius 2, a circle centre 1−i radius 1, and the region inside the second circle but outside the first shaded.
Q3Differentiation, Trigonometry5 marks
For parametric equations, dxdy=dθdy÷dθdx, then use double angle formulae to reach cotθ.
Differentiate both equations with respect to θ:
dθdx=2sin2θ,dθdy=2+2cos2θ
B1
Use dxdy=dθdy÷dθdx.
M1
Substitute the derivatives:
dxdy=2sin2θ2+2cos2θ
A1
Use cos2θ=2cos2θ−1 and sin2θ=2sinθcosθ. The numerator becomes 2+2(2cos2θ−1)=4cos2θ and the denominator 4sinθcosθ.
M1
Cancel 4cosθ:
dxdy=4sinθcosθ4cos2θ=sinθcosθ=cotθ
A1
Answerdxdy=cotθ (as given)
Q4Logarithmic and exponential functions6 marks
Write the −1 as −log1010 so every term is a logarithm, combine them into one log equation, remove the logs and solve the resulting quadratic.
Use log1010=1 to write −1=−log1010.
B1
Use the power law 2log10(x+1)=log10(x+1)2 and the quotient law to collect the logs:
log10(2x+1)−log10(x+1)2=−log1010
M1
Combine and remove the logs: log10(x+1)22x+1=log10101, so
(x+1)22x+1=101
A1
Cross-multiply: 10(2x+1)=(x+1)2, so 20x+10=x2+2x+1 and
x2−18x−9=0
A1
Solve with the quadratic formula: x=218±324+36=9±90.
M1
To 3 decimal places x=18.487 or x=−0.487. Both are valid, since each gives 2x+1>0 and x+1>0.
A1
Answerx=18.487 and x=−0.487
Q5Numerical solution of equations5 marks
(a)2 marks
Roots of an equation f(x)=g(x) are the x-coordinates where the graphs of y=f(x) and y=g(x) meet, so sketch both on 0<x<π and count intersections.
Sketch y=cosecx on 0<x<π: a U-shape, symmetrical about x=2π, with minimum value 1 at x=2π, and rising towards infinity as x→0 and x→π (asymptotes at both ends).
B1
Sketch y=1+e−21x on the same axes: a decreasing curve, always above 1, starting at y=2 when x=0 and ending above 1 at x=π. It is a smooth curve with negative gradient throughout.
Near x=0 and near x=π the cosec curve tends to infinity, far above the exponential, while at x=2π it is 1, below the exponential which is above 1. So the graphs cross once on each side of x=2π. Mark both intersections: there are exactly two roots.
B1
AnswerTwo intersections between y=cosecx and y=1+e−21x in 0<x<π, so exactly two roots.
Watch outNot marking the intersection points (or not saying they are the roots) on the sketch.
(b)3 marks
Feed each answer back into the formula, keeping 4 decimal places, until the value settles to 2 decimal places, then check the rounding.
Use your GDC with x1=2 and xn+1=π−sin−1(e−21xn+11).
The iterations are x2=2.3217, x3=2.2760, x4=2.2824.
The real and imaginary parts both vanish, so −1+5i is a root.
AnswerSubstituting gives 0, so −1+5i is a root.
(b)4 marks
The cubic has real coefficients, so complex roots come in conjugate pairs; the pair gives a quadratic factor, and dividing leaves a linear factor.
Real coefficients, so the conjugate −1−5i is also a root.
B1
Sum of these two roots is −2 and their product is 1+5=6, so a quadratic factor is x2−(−2)x+6.
M1
This gives the factor x2+2x+6.
A1
Divide: 2x3+x2+6x−18=(x2+2x+6)(2x−3), so the remaining root is x=23.
A1
AnswerThe other roots are −1−5i and x=23.
Watch outWriting only the real root and omitting the conjugate complex root −1−5i.
Q8Differential equations6 marks
The equation separates into y terms and x terms, so separate the variables, integrate both sides and use the point (1,1) to find the constant.
Separate the variables:
y1dy=x1−2x2dx=(x1−2x)dx
B1
Integrate the left side: ∫y1dy=lny.
B1
Integrate the right side: ∫(x1−2x)dx=lnx−x2 (plus constant).
lny=lnx−x2+c
B1
Use x=1, y=1: ln1=ln1−1+c, so c=1.
M1
So lny=lnx−x2+1.
A1
Take exponentials: y=elnx−x2+1=xe1−x2.
A1
Answery=xe1−x2
Watch outDividing 1−2x2 by x incorrectly, for example integrating x1−2x2.
Q9Algebra10 marks
(a)5 marks
The denominator has a linear factor and a repeated linear factor, so use the partial fraction form with A, B and C, then find each by substituting convenient values of x.
Write the form:
(1−x)(2+3x)28+5x+12x2=1−xA+2+3xB+(2+3x)2C
B1
Multiply through by the denominator: 8+5x+12x2=A(2+3x)2+B(1−x)(2+3x)+C(1−x).
M1
Put x=1: 8+5+12=25A, so A=1.
A1
Put x=−32: 8−310+316=10=35C, so C=6.
A1
Put x=0: 8=4A+2B+C=4+2B+6, so B=−1.
A1
Answer1−x1−2+3x1+(2+3x)26
(b)5 marks
Rewrite each partial fraction as (1+something)n and use the binomial expansion up to x2.
The constant term is 2, the x term is −411x and the x2 term is 10x2.
A1
Answer2−411x+10x2
Q10Differentiation, Integration10 marks
(a)5 marks
A minimum point is a stationary point, so differentiate with the product rule and set the derivative to zero.
Use the product rule on (2−x)e−21x:
dxdy=−e−21x−21(2−x)e−21x
M1
Simplify: dxdy=e−21x(2x−2).
A1
Set dxdy=0. Since e−21x=0, 2x−2=0.
M1dep
So x=4.
A1
Substitute: y=(2−4)e−2=−2e−2.
A1
AnswerM=(4,−2e−2)
(b)5 marks
The shaded area is ∫02ydx (the curve meets the x-axis at x=2); integrate by parts.
The curve crosses the x-axis where 2−x=0, so the limits are x=0 to x=2.
Integrate by parts with u=2−x and dv=e−21xdx, so v=−2e−21x:
∫(2−x)e−21xdx=−2(2−x)e−21x−2∫e−21xdx
M1
This equals −2(2−x)e−21x+4e−21x.
A1
Simplify to 2xe−21x.
A1
Apply the limits:
[2xe−21x]02=2(2)e−1−0
M1dep
The area is 4e−1.
A1
Answer4e−1
Q11Vectors11 marks
(a)5 marks
Intersection means one point has the same position vector on both lines, so equate components and solve.
General points in component form: (1+aλ,2+2λ,1−λ) and (2+2μ,1−μ,−1+μ).
B1
Equate the components:
1+aλ=2+2μ,2+2λ=1−μ,1−λ=−1+μ
M1
Use the last two (no a): from the third μ=2−λ; substitute into the second: 2+2λ=1−2+λ, so λ=−3 and μ=5.
A1
Substitute into the first: 1−3a=2+10=12, so a=−311.
A1
Position vector of the point: using μ=5, (2+10,1−5,−1+5)=(12,−4,4).
A1
Answera=−311; position vector 12i−4j+4k
(b)6 marks
The angle between the lines is the angle between their direction vectors, found with the scalar product. Because the angle is acute, cosθ=∣d1∣∣d2∣∣d1⋅d2∣=61, so set the ratio equal to ±61.
Directions are d1=ai+2j−k and d2=2i−j+k. Scalar product:
d1⋅d2=2a−2−1=2a−3
M1
Moduli: ∣d1∣=a2+5, ∣d2∣=6. Divide the scalar product by the product of the moduli and set it equal to ±61 (the dot product can be negative while the acute angle is used).
M1
So
6a2+52a−3=±61
A1
Square both sides: 36(2a−3)2=6(a2+5). Expand: 138a2−432a+294=0, which simplifies to 23a2−72a+49=0.