IGCSE Co-ordinated Sciences 0654 · Paper practice

Paper 6 past paper questions

Every archived Co-ordinated Sciences 0654 Paper 6 question in one place. Practise them by topic, then sit a full paper under timed conditions.

Most-tested topicsEarlier syllabus topics 114Acids, bases and salts 44Motion, forces and energy 36Biological molecules 29Practical skills and investigations 28Experimental techniques and chemical analysis 21

Course route
Sort questions

You’re practising 2020–2021 papers. The 2022–2025 papers, including 2025, need a plan.

Unlock from $6/mo
24 free questions

2021 MarchPaper 6Question 1Component 62Variant 212 marks
Practical skills and investigations
Loading original question

1 A student investigates the action of an enzyme on milk. Milk contains a nutrient that makes it look white (opaque). When the nutrient is broken down, the milk becomes see-through (transparent). Procedure The student: • adds 2.0 cm3 of 5.0% enzyme solution to 3.0 cm3 of milk in a test-tube and starts a stop-clock • measures the time taken for the contents of the test-tube to go see-through • records this time in Table 1.1. The student repeats the procedure, using enzyme concentrations of 4.0%, 3.0%, 2.0% and 1.0% instead of 5.0%. (a) Suggest a suitable piece of apparatus the student uses to measure the 2.0 cm3 of enzyme solution. … [1] (b) Fig. 1.1 shows the reading on the stop-clock for 3.0% enzyme concentration. min sec Fig. 1.1 Record this time, in seconds, in Table 1.1. 4 Table 1.1 percentage enzyme concentration time taken to go see-through / seconds 5.0 14 4.0 56 3.0 2.0 145 1.0 192 [1] (c) (i) On the grid provided, plot a graph of time taken to go see-through (vertical axis) against enzyme concentration. [3] 5 (ii) Draw the best-fit line. [1] (d) (i) State the relationship between the enzyme concentration and the time taken for the milk to go see-through.… [1] (ii) Use your graph to estimate the time taken for the milk to go see-through using an enzyme concentration of 4.5%. Show on your graph how you arrived at your answer. time taken = … seconds [2] (iii) The student thinks that the reaction with 1.0% enzyme concentration has the greatest rate. State whether the student is correct. … Explain your answer.… [1] (e) State two variables that the student keeps constant. variable 1 … variable 2 … [2] [Total: 12]

2021 JunePaper 6Question 1Component 61Variant 112 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

1 A student investigates the movement of coloured water in a celery stem. (a) Procedure • The student places the freshly cut end of a celery stem in some coloured water as shown in Fig. 1.1. freshly cut end coloured water Fig. 1.1 • After five minutes, the student removes the celery stem from the coloured water. Fig. 1.2 shows the cut end before it was placed in the coloured water and after it was placed in the coloured water. before after Fig. 1.2 3 (i) In the box provided, make an enlarged detailed pencil drawing of the cut end of the celery stem after it was placed in the coloured water, as shown in Fig. 1.2. [3] (ii) On your drawing from (a)(i), use a label line to label with an X one of the areas that is stained. [1] (iii) The stained areas are xylem tissue. State what can be concluded about the function of the xylem tissue. … [1] 4 (b) Another student measures and records the movement of coloured water into a celery stem over five hours. Their results are shown in Table 1.1. Table 1.1 time taken / hours distance moved / mm 0 0 1 21 2 39 3 60 4 82 5 97 (i) On the grid provided, plot a graph of distance moved (vertical axis) against time taken. [3] 5 (ii) Draw the best-fit straight line. [1] (iii) Use your graph to determine the distance moved by the coloured water after 1.5 hours. Indicate on your graph how you arrived at your answer. distance moved = … mm [2] (iv) Describe the relationship between the distance moved by the coloured water and the time taken.… [1] [Total: 12]

2021 JunePaper 6Question 1Component 62Variant 213 marks
Biological moleculesBiological molecules
Loading original question

1 A student investigates the nutrient content of three solutions, A, B and C. She tests A, B and C separately with Benedict’s solution, biuret solution and iodine solution. (a) Name the test solution which requires use of a hot water-bath. … [1] (b) • Solution A tests positive with iodine solution. • Solution B tests positive with biuret solution. • Solution C tests positive with Benedict’s solution. • Results of all the other tests are negative. (i) Use this information to record in Table 1.1, the final colours the student observes. Include the colours for negative results. Table 1.1 solution final colour with Benedict’s solution final colour with biuret solution final colour with iodine solution A B C [4] (ii) Use the results to state the nutrient present in each solution. solution A contains … solution B contains … solution C contains … [3] 3 (c) Describe a method used to test a liquid for the presence of fats. Include the observation for a positive result. method… observation … [2] (d) A student investigates the nutrient concentration in two different samples using Benedict’s solution. This allows her to compare the concentrations of the nutrient in the two solutions. (i) Explain how the results will allow the concentrations of the nutrient in the two solutions to be compared.… [1] (ii) State two variables which need to be controlled in this investigation. variable 1 … variable 2 … [2] [Total: 13]

2021 JunePaper 6Question 1Component 63Variant 313 marks
Biological moleculesBiological molecules
Loading original question

1 Fig. 1.1 shows a slice of pepper. A B Fig. 1.1 (a) In the box, make an enlarged detailed pencil drawing of the surface of the slice of pepper. [3] (b) (i) Draw a line to join points A and B in Fig. 1.1. Measure and record the length of this line in millimetres to the nearest millimetre. length of line A–B in Fig. 1.1 = … mm [1] (ii) Draw the line A–B to show this diameter on your drawing in (a). Measure and record the length of this line in millimetres to the nearest millimetre. length of line A–B on drawing = … mm [1] 3 (iii) Use your measurements in (b)(i) and (b)(ii) to calculate the magnification m of your drawing. Use the equation shown. m = length of line A–B on drawing length of line A–B in Fig. 1.1 m = … [1] (c) A student tests some egg white and potato for the presence of nutrients. (i) The egg white contains protein and no starch. The potato contains starch and no protein. Complete Table 1.1 with the final colour observed in each test. Table 1.1 test solution final colour observed with egg white final colour observed with potato iodine biuret [4] (ii) Suggest why it is difficult to test a red pepper using biuret solution.… [1] (d) A student tests the egg white for the presence of fat. (i) State two substances needed for the fat test. … and … [1] (ii) Explain why there should be no flames in the laboratory when doing this test. … [1] [Total: 13]

2021 NovemberPaper 6Question 1Component 61Variant 110 marks
ReproductionSexual reproduction in plants
Loading original question

1 Fig. 1.1 is a full-size photograph of a flower with some of the petals removed. A B Fig. 1.1 3 (a) (i) In the box, make a large, detailed pencil drawing of the flower. Include the internal parts of the flower. [3] (ii) On your drawing, add a labelled line to identify an anther. [1] (b) (i) On Fig. 1.1 draw a line to join points A and B, which shows the width of one petal. Record this width, AB, in millimetres to the nearest millimetre. width of petal AB on Fig. 1.1 = … mm [1] (ii) Draw a line to show the same width, AB, of the petal on your drawing. Record this width in millimetres to the nearest millimetre. width of petal on drawing = … mm [2] 4 (iii) Use your measurements in (b)(i) and (b)(ii) to calculate the magnification M of your drawing. Use the equation shown. M = width of petal on drawing width of petal AB on Fig. 1.1 M = … [1] (c) A student takes the real flower shown in Fig. 1.1 and removes the petal AB. The student measures the width of this petal. Suggest why the width of the real petal is larger than the measurement AB in (b)(i). You can assume all of the widths have been measured accurately. … [1] (d) The student removes three more petals from the flower. Their widths are shown in Table 1.1. Table 1.1 petal width / mm 1 53 2 55 3 51 Calculate the average width of these three petals. Show your working. average width = … mm [1] [Total: 10]

2021 NovemberPaper 6Question 1Component 62Variant 29 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

1 A student investigates how germinating bean seeds respond to gravity. The student has two germinating bean seeds, A and B. The beans are left to grow for two days. Fig. 1.1 shows the appearance of beans A and B after two days. root root A B Fig. 1.1 (a) Measure on Fig. 1.1 the length of the roots A and B after two days. This is the distance between the dotted lines. Record in Table 1.1 your value in millimetres to the nearest millimetre. Table 1.1 bean root length after two days / mm root length after four days / mm increase in root length / mm A 38 B [2] 3 (b) Bean A is rotated through 90°. Bean B is not rotated. Fig. 1.2 shows the appearance of beans A and B after two more days growth. A B Fig. 1.2 Describe how Fig. 1.2 shows that the growth of roots is affected by gravity.… [1] (c) The student measures the length of the root of bean A and records this in Table 1.1. On Fig. 1.2 measure the length of the root of bean B. Record in Table 1.1 your value in millimetres to the nearest millimetre. [1] (d) (i) Calculate the increase in root length for bean A and bean B. Use the equation shown. increase in length = length after four days – length after two days Record your values in Table 1.1. [1] (ii) Describe how rotating the bean affects the growth rate of the root. Explain your answer with reference to the data in Table 1.1. effect … explanation… [1] 4 (e) The student repeats the investigation with more beans. To make it a fair test they use beans of the same species (type). Explain why the student uses beans of the same species.… [1] (f) The student tests a sample of crushed bean root for the presence of starch. Name the reagent used to test for starch and state the observation for a positive result. reagent … observation … [2] [Total: 9]

2021 NovemberPaper 6Question 1Component 63Variant 313 marks
EnzymesEnzymes
Loading original question

1 A student investigates the action of the enzyme amylase on starch. Procedure The student: step 1 adds 10 cm3 of starch solution into each of test-tubes A and B step 2 places the test-tubes in a warm water-bath at 35°C step 3 places a test-tube of amylase solution into the warm water-bath step 4 places a test-tube of distilled water into the warm water-bath step 5 labels five wells A and five wells B on a spotting tile step 6 adds two drops of iodine solution to each well as shown in Fig. 1.1 A A A A B A B iodine pipette spotting tile B B B Fig. 1.1 step 7 waits five minutes step 8 pours the amylase into the starch in test-tube A step 9 pours the distilled water into the starch in test-tube B step 10 replaces both test-tubes into the warm water-bath step 11 starts a stop-clock step 12 places two drops from the mixture in test-tube A into one of the wells labelled A step 13 places two drops from the mixture in test-tube B into one of the wells labelled B step 14 records in Table 1.1 the colour observed in both of these wells step 15 repeats steps 12–14 at one minute intervals for 4 minutes. 3 Table 1.1 time / minutes colour observed sample from test-tube A (starch and amylase) sample from test-tube B (starch and distilled water) 0 blue-black blue-black 1 blue-black blue-black 2 dark brown blue-black 3 brown blue-black 4 brown blue-black (a) Name a piece of apparatus suitable for measuring 10 cm3 of starch solution in step 1. … [1] (b) (i) State what can be concluded about the presence of starch in test-tubes A and B after 4 minutes. test-tube A … test-tube B … [2] (ii) Suggest the effect the enzyme amylase has on starch.… [1] (iii) Suggest why distilled water is used in test-tube B. … [1] (c) (i) Suggest why all the test-tubes are placed in the warm water-bath at the start of the investigation.… [1] (ii) In steps 8 and 9 the student does not stir the mixture. Suggest why stirring improves the procedure.… [1] 4 (d) The enzyme amylase works best at 35–40 °C. The student repeats the procedure. Fig. 1.2 shows the thermometer reading for the warm water-bath in this repeat. –10 0 10 20 30 40 °C Fig. 1.2 (i) Record the thermometer reading to the nearest 0.5 °C. temperature = … °C [1] (ii) Suggest how the results in the repeated procedure are different from the results in Table 1.1.… [1] (iii) Suggest how the temperature of the warm water-bath can be maintained at 35 °C.… [1] (e) Boiling amylase solution stops the enzyme working. Predict the results expected if you repeat the procedure using boiled amylase.… [1] (f) The enzyme amylase is a protein. Name the reagent used to test for the presence of protein. Give the observation for a positive result. reagent … observation … [2] [Total: 13] 5

2021 MarchPaper 6Question 2Component 62Variant 28 marks
Biological moleculesBiological molecules
Loading original question

2 A student tests some milk for its nutrient content. (a) The student adds biuret solution and iodine solution to samples of milk. (i) Name the nutrients these solutions test for. biuret solution … iodine solution … [2] (ii) The biuret solution turns purple (lilac). The iodine solution stays brown. State conclusions for these tests on milk.… [2] (b) The student tests some milk using Benedict’s solution. (i) Name the nutrient that Benedict’s solution tests for. … [1] (ii) State the colour the student observes if the milk contains: a small amount of this nutrient … a large amount of this nutrient. … [2] (iii) State and explain a safety precaution that the student takes when doing the test. safety precaution … explanation … [1] [Total: 8]

2021 JunePaper 6Question 2Component 61Variant 18 marks
Biological moleculesBiological molecules
Loading original question

2 A student tests some celery for its nutrient content. (a) The student puts some crushed celery into each of three test-tubes. The student does the food tests shown in Table 2.1. Table 2.1 food test final colour observed conclusion Benedict’s solution orange biuret solution blue iodine solution brown (i) Complete Table 2.1 by writing a conclusion for each of the three tests. [3] (ii) State which test requires the use of heat. … [1] (iii) Name a piece of apparatus suitable for measuring 2.0 cm3 of the test solutions. … [1] (b) (i) The student tests the celery for the presence of fat. State the two substances needed for the fat test. … and … [1] (ii) State the observation for a positive result. … [1] (iii) Explain why there should be no flames in the laboratory when doing this test. … [1] [Total: 8] 7

2021 JunePaper 6Question 2Component 62Variant 27 marks
Practical skills and investigations
Loading original question

2 Small maggots (insect larvae), as shown in Fig. 2.1, live in damp, warm environments. Fig. 2.1 A student wants to find out if maggots are attracted to different colours of light. Plan an investigation to find out to which colour of light maggots are most attracted. The student is provided with some maggots which need to be kept alive during the investigation, lamps of different colours and any other common laboratory apparatus. Include in your plan: • the apparatus needed • a brief description of the method, explaining any safety precautions • the measurements you will make, including how to make them as accurate as possible • the variables you will control • how you will use your results to draw a conclusion. You may include a labelled diagram if you wish. You may also include a table that can be used to record results if you wish. You are not required to include any results. 5… [7]

2021 JunePaper 6Question 2Component 63Variant 37 marks
RespirationRespiration
Loading original question

2 A student investigates the concentration of carbon dioxide in some water samples. Hydrogencarbonate indicator changes colour in different concentrations of dissolved carbon dioxide as shown in Fig. 2.1. carbon dioxide concentration colour of hydrogencarbonate indicator high normal low yellow red purple Fig. 2.1 (a) The student is given three water samples, A, B and C. The student adds 1 cm3 of hydrogencarbonate indicator to each water sample. The student’s results are shown in Table 2.1. Table 2.1 water sample colour of hydrogencarbonate indicator observed carbon dioxide concentration A purple B yellow C red (i) Use the student’s observations and the information in Fig. 2.1 to complete Table 2.1. [2] (ii) Suggest a piece of apparatus suitable for adding 1 cm3 of hydrogencarbonate indicator to the water samples. … [1] 5 (b) Animals produce carbon dioxide in respiration and plants use up carbon dioxide in photosynthesis. All three water samples previously contained living organisms. (i) Suggest which water sample contained just animals. Explain your answer. water sample … explanation… [1] (ii) Suggest which water sample contained just plants. Explain your answer. water sample … explanation… [1] (iii) Suggest what the other water sample contained. Explain your answer.… [1] (c) Name another reagent used to test for the presence of carbon dioxide gas. … [1] [Total: 7]

2021 NovemberPaper 6Question 2Component 61Variant 110 marks
Biological moleculesBiological molecules
Loading original question

2 A student investigates the nutrient content of samples of honey, milk and rice. The student tests the samples with Benedict’s solution, biuret solution and iodine solution. (a) Table 2.1 shows the student’s observations. Table 2.1 final colour observed with food sample Benedict’s solution biuret solution iodine solution honey red blue brown milk green purple brown rice blue blue blue-black (i) Name a piece of apparatus suitable to measure 1 cm3 of the testing solution. … [1] (ii) State which test solution requires the use of heat. … [1] (iii) Use the observations in Table 2.1 to identify and compare the nutrients present in honey, milk and rice. honey … milk … rice … [5] (b) (i) A student tests the honey for the presence of fat. State the two reagents the student needs to use. … and … State the observation for a positive result. … [2] (ii) The test in (b)(i) is not suitable for testing the presence of fat in milk. Suggest a reason why. … [1] [Total: 10]

2021 NovemberPaper 6Question 2Component 62Variant 211 marks
Practical skills and investigations
Loading original question

2 A student investigates the heart rate of Daphnia. Daphnia are small animals that live in water. Procedure The student: • measures the heart rate of a Daphnia in water • records in Table 2.1 the number of heartbeats in 1 minute • repeats this measurement two more times • adds some cola, coffee or tea to three separate samples of water containing Daphnia. The student repeats the procedure with each water sample. Table 2.1 solution heart rate / beats per minute trial 1 trial 2 trial 3 average water 194 287 299 260 cola 374 389 378 tea 415 409 402 409 coffee 316 324 313 318 (a) Calculate the average heart rate for Daphnia in cola. Record in Table 2.1 this value to the nearest whole number. [2] 6 (b) On the grid draw a bar chart of average heart rate (vertical axis) against solution. Use the values in Table 2.1. [3] (c) Cola and tea contain a chemical called caffeine. Use your bar chart to describe the effect caffeine has on the average heart rate of Daphnia. … [1] (d) (i) Explain why the average result for heart rate of Daphnia in water is not reliable.… [1] (ii) Suggest how the student can make this average result for the heart rate of Daphnia in water more reliable.… [1] (iii) Suggest why water with nothing added is used as one of the solutions. … [1] 7 (e) The maker’s of the coffee claim that it does not contain caffeine. Use the data in Table 2.1 and your bar chart to state if you agree with the makers claim. Explain your answer. statement … explanation… [1] (f) The student uses a different Daphnia for each solution. Suggest why a different Daphnia must be used.… [1] [Total: 11]

2021 NovemberPaper 6Question 2Component 63Variant 37 marks
Practical skills and investigations
Loading original question

2 Washing powders remove stains from clothes by dissolving the stain. Washing powder X contains enzymes, washing powder Y does not contain enzymes. Plan an investigation to find out which washing powder, X or Y, is better at removing stains. You are provided with: • white cloth and scissors • yellow egg solution which stains cloth • samples of washing powders X and Y • water • any other common laboratory apparatus. Include in your plan: • any other apparatus you will need • a brief description of the method including any safety precautions • the measurements you will make, including how you ensure they are as accurate as possible • the variables you will control • how you will use your results to draw a conclusion. You may include a labelled diagram if you wish. You may include a results table if you wish. You are not required to include any results. 7… [7]

2021 MarchPaper 6Question 3Component 62Variant 213 marks
Electricity and magnetismElectrical quantities
Loading original question

3 A student does two different experiments to investigate the reactivity of five metals: aluminium, copper, iron, magnesium and zinc. (a) In the first experiment, the student measures the voltage (potential difference) produced when two different metals are dipped into salt solution. This happens because the metals have different reactivities. The larger the difference in reactivity of the two metals, the greater the voltage produced. (i) Procedure The student: • half-fills a beaker with salt solution • sets up the apparatus shown in Fig. 3.1 V copper salt solution aluminium Fig. 3.1 • records, in Table 3.1, the reading on the voltmeter. The student repeats the procedure four more times using copper, iron, magnesium and zinc strips instead of the aluminium strip. Table 3.1 metal potential difference / V aluminium copper 0.0 iron magnesium 2.1 zinc 0.7 8 The voltmeter readings for aluminium and iron are shown in Fig. 3.2. Record these values, to one decimal place, in Table 3.1. aluminium 1.38 V iron 0.14 V Fig. 3.2 [2] (ii) Use the results in Table 3.1 to complete the order of reactivity of the metals. Copper has been put in its correct place. most reactive… least reactive copper [1] (iii) State two variables which must be controlled in this experiment. 1 … 2 … [2] (b) In the second experiment, different metal powders are added separately to dilute hydrochloric acid. The reactivity of each metal is compared. Procedure The student: • half-fills a test-tube with dilute hydrochloric acid • adds one spatula of aluminium powder to the test-tube • records, in Fig. 3.3, a description of the reaction. The student repeats the procedure using copper, iron, magnesium and zinc instead of aluminium. The student’s results are shown in Fig. 3.3. 9 magnesium very fast bubbles aluminium fast bubbles iron no bubbles zinc quite fast bubbles copper no reaction Fig. 3.3 (i) Draw a results table and enter the student’s results into it. [2] (ii) Use the results in (b)(i) to place the metals in order of reactivity. most reactive… least reactive … [2] 10 (c) (i) Suggest which method gives a better order of reactivity. Explain your answer.… [1] (ii) Suggest one improvement to the second experiment (using hydrochloric acid) to make the results more reliable. Do not include repeating the experiment in your answer.… [1] (d) Describe the test for hydrogen gas. State the observation for a positive identification. test … observation … [2] [Total: 13] 11

2021 JunePaper 6Question 3Component 61Variant 15 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

3 In this investigation a student designs a test to distinguish between sodium hydrogencarbonate and sodium carbonate. Procedure The student: • places aqueous sodium hydrogencarbonate into each of four test-tubes • does the tests described in Table 3.1 • records their results in Table 3.1. The student repeats the procedure using aqueous sodium carbonate instead of aqueous sodium hydrogencarbonate. Table 3.1 aqueous sodium hydrogencarbonate aqueous sodium carbonate colour with methyl orange yellow yellow observation when dilute hydrochloric acid added identity of gas made bubbles quickly carbon dioxide bubbles quickly carbon dioxide observation when aqueous magnesium chloride added colourless solution white precipitate (ppt.) flame test colour yellow yellow (a) A colourless solution is either sodium hydrogencarbonate or sodium carbonate. Use the results in Table 3.1 to describe a test to identify the solution as either sodium hydrogencarbonate or sodium carbonate. Explain your answer.… [2] 9 (b) Describe the test for carbon dioxide. State the observation for a positive result. test … observation … [1] (c) Describe how to do a flame test.… [2] [Total: 5]

2021 JunePaper 6Question 3Component 62Variant 211 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

3 In this investigation a student finds the amount of heat energy released when magnesium reacts with dilute hydrochloric acid. (a) Procedure The student: • adds 15 cm3 of dilute hydrochloric acid into a test-tube • measures the initial temperature of the dilute hydrochloric acid and records this temperature in Table 3.1 to the nearest 0.5 °C • adds 0.1 g of magnesium powder to the dilute hydrochloric acid • stirs the mixture and measures the highest temperature reached • records in Table 3.1 this temperature to the nearest 0.5 °C. The student repeats the procedure using 0.2 g, 0.3 g and 0.4 g of magnesium powder. Table 3.1 mass of magnesium 0.1 g 0.2 g 0.3 g 0.4 g initial temperature of dilute hydrochloric acid / °C 21.5 21.5 21.5 22.0 highest temperature of mixture / °C 32.0 43.5 change in temperature ΔT / °C 10.5 21.5 (i) Suggest why the student stirs the mixture.… [1] (ii) Fig. 3.1 shows the thermometer readings for the highest temperature when 0.1 g and 0.3 g of magnesium powder are added. Record in Table 3.1 these readings to the nearest 0.5 °C. 20 30 30 40 0.1 g magnesium °C °C 0.3 g magnesium Fig. 3.1 [2] (iii) Calculate the change in temperature, ΔT, for 0.1 g of magnesium powder added and 0.3 g of magnesium powder added. Record these values in Table 3.1. [1] 7 (b) (i) Calculate the heat energy released when 0.2 g of magnesium powder and when 0.4 g of magnesium powder are added to dilute hydrochloric acid. Use the equation shown. heat energy released = 63 × ΔT Give your answers to two significant figures. Heat energy released when 0.2 g of magnesium powder is added. heat energy released = … J Heat energy released when 0.4 g of magnesium powder is added. heat energy released = … J [2] (ii) Two experimental results are considered similar and within experimental error if they are within 10% of each other. A student suggests that the heat energy released when 0.4 g of magnesium powder is added to dilute hydrochloric acid should be two times the energy released when 0.2 g of magnesium powder is added. State and explain if the results support the student’s suggestion. Include a calculation in your answer.… [2] (iii) Suggest two changes to the apparatus which would make the measurement of the change of temperature more accurate. change 1… change 2… [2] (iv) The student repeats the experiment but finds that the change in temperature for 1 g, 2 g and 3 g of magnesium added all give the same rise in temperature. Suggest why the changes in temperature are all the same.… [1] [Total: 11]

2021 JunePaper 6Question 3Component 63Variant 320 marks
Acids, bases and saltsPreparation of salts
Loading original question

3 A student investigates the neutralisation of aqueous sodium hydroxide by dilute hydrochloric acid. Concentration can have the unit M. A solution with a concentration of 0.2 M is two times more concentrated than a 0.1 M solution. (a) Procedure The student: • measures 10 cm3 of 0.5 M aqueous sodium hydroxide using a measuring cylinder and pours this into a conical flask • adds 5 drops of methyl orange indicator to the flask, the indicator turns yellow • slowly adds drops of dilute hydrochloric acid until the indicator just turns orange • marks the number of drops on a tally chart • adds up the total number of drops added and records it in a table. The student repeats the procedure with 1.0 M, 1.5 M and 2.0 M aqueous sodium hydroxide instead of the 0.5 M aqueous sodium hydroxide. The student uses the same dilute hydrochloric acid. The tally chart in the student’s notebook is shown in Fig. 3.1. 0.5 M l l l l l l l l 2.0 M l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l 1.0 M l l l l l l l l l l l l l l l l 1.5 M l l l l l l l l l l l l l l l l l l l l l l l l l Fig. 3.1 (i) Construct a results table for the student’s results. [1] 7 (ii) Count the number of drops recorded in the tally chart for each concentration of aqueous sodium hydroxide. Record the numbers in your table. [2] (iii) Suggest two improvements to the method to make the results more accurate and reliable. improvement 1… improvement 2… [2] (b) (i) Plot on the grid provided a graph of number of drops of dilute hydrochloric acid (vertical axis) against concentration of aqueous sodium hydroxide. [3] (ii) Draw the best‑fit straight line. [1] (iii) Describe in detail the relationship between concentration of aqueous sodium hydroxide and number of drops of dilute hydrochloric acid added.… [2] (iv) Use your graph to predict the number of drops of the same dilute hydrochloric acid needed to just change the colour of methyl orange when 10 cm3 of 1.8 M aqueous sodium hydroxide is used. Show on your graph how you arrived at your answer. number of drops = … [2] 8 (v) The student repeats the four experiments but this time uses hydrochloric acid that is twice as concentrated. Draw a line on the grid to show the results the student should expect to get. Label this line E. [2] (c) The mixture in the conical flask is a solution of the salt called sodium chloride. Fig. 3.2 shows drawings of apparatus. A B NOT TO SCALE Fig. 3.2 (i) Name the pieces of apparatus shown in Fig. 3.2 labelled A and B. A is … B is … [2] 9 (ii) A student wants to separate the salt from the aqueous salt solution. Choose the apparatus from Fig. 3.2 needed to separate quickly the salt from the aqueous salt solution. Draw a large, clear, labelled diagram of the assembled apparatus used to get the salt. Use a ruler. [3] [Total: 20]

2021 NovemberPaper 6Question 3Component 61Variant 112 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

3 A student investigates the effect of dissolving salt on the boiling point temperature of water. (a) Procedure The student: step 1 half fills a boiling tube (large test-tube) with distilled water step 2 heats the water until it boils step 3 records the boiling point temperature in Table 3.1 step 4 adds one spatula of salt to the water in the boiling tube step 5 heats the salt solution until it boils and records the boiling point temperature in Table 3.1. The student repeats steps 4 and 5 until seven spatulas of salt have been added. Table 3.1 spatulas of salt added boiling point temperature / °C 0 100.0 1 101.5 2 3 106.0 4 107.5 5 6 108.0 7 108.0 (i) Fig. 3.1 shows the thermometer readings for 2 and 5 spatulas of salt added. 110 100 2 spatulas of salt °C 110 100 5 spatulas of salt °C Fig. 3.1 Record in Table 3.1 these values to the nearest 0.5 °C. [2] 7 (ii) State an improvement to the procedure that will make the results more reliable. … [1] (b) (i) On the grid draw a graph of boiling point temperature (vertical axis) against number of spatulas of salt added. Do not start the y-axis at 0. [3] (ii) Draw the line of best-fit. [1] (iii) State the relationship between amount of salt added and boiling point temperature.… [2] (iv) Use your graph to estimate the boiling point temperature of water when 3.5 spatulas of salt are added. Show on your graph how you arrived at your answer. boiling point temperature = … °C [2] (v) The boiling point temperature is the same when 6 and 7 spatulas of salt are added. Suggest why.… [1] [Total: 12]

2021 NovemberPaper 6Question 3Component 62Variant 210 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

3 Carbon dioxide gas can be made from marble chips and dilute hydrochloric acid. The marble chips are placed in a conical flask and dilute hydrochloric acid is added. The carbon dioxide gas is collected over water in a test-tube. Fig 3.1 shows some pieces of apparatus. NOT DRAWN TO SCALE Fig. 3.1 (a) (i) Name a piece of apparatus that can be used to collect and measure the volume of gas produced. … [1] 9 (ii) Draw a labelled diagram of the assembled apparatus used for making and collecting the carbon dioxide gas made in this reaction. In your diagram include the following apparatus from Fig. 3.1: • a conical flask • a beaker • a test-tube • a delivery tube • any other apparatus necessary. Also include the marble chips, dilute hydrochloric acid and water and label them. [4] (iii) Ammonia is a gas which is very soluble in water. Suggest why ammonia gas cannot be collected using the apparatus in the diagram in (a)(ii). … [1] 10 (b) A substance freezes and melts at the same temperature. A pure substance has a fixed melting point temperature. When an impurity is added to a substance its melting point temperature decreases. (i) P, Q and R are solutions of different concentrations of the same substance. Procedure The student: step 1 half fills a beaker with crushed ice step 2 stirs the ice step 3 measures and records in Table 3.1 the melting point temperature of ice, 0.0 °C. step 4 adds 10 cm3 of solution P to the ice step 5 stirs the mixture and records in Table 3.1 the lowest temperature reached step 6 pours the mixture into the waste container. The student repeats steps 1, 4 and 5 with solution Q and then solution R instead of solution P. Table 3.1 solution added to ice melting point temperature / °C none added 0.0 P –5.5 Q R 11 Fig. 3.2 shows thermometer readings for solution Q and solution R. Record these negative temperatures in Table 3.1. 10 –10 0 Q °C 10 –10 0 °C R Fig. 3.2 [2] (ii) The more impurity that is added to a substance, the lower its melting point temperature becomes. Place the solutions P, Q and R in order of increasing concentration. least concentrated… most concentrated … [1] (iii) In cold countries salt is added to icy roads so that the ice melts. Suggest why adding salt helps the ice to melt.… [1] [Total: 10]

Full Paper 6 past papers with mark schemes

Paper 6: quick facts

Which topics come up most in IGCSE Co-ordinated Sciences 0654 Paper 6?

The most-tagged topics in IGCSE Co-ordinated Sciences 0654 Paper 6 are Earlier syllabus topics (114), Acids, bases and salts (44) and Motion, forces and energy (36), out of 254 past-paper questions from 2020-2025. These are archive counts, not a prediction, and a question can carry more than one topic.

Are the IGCSE Co-ordinated Sciences 0654 Paper 6 questions free?

84 of the 254 IGCSE Co-ordinated Sciences 0654 Paper 6 questions are free to practise. The other 170 need a plan for IGCSE Co-ordinated Sciences 0654, from $6 a month.

Do the IGCSE Co-ordinated Sciences 0654 Paper 6 questions have answers?

Yes. Each IGCSE Co-ordinated Sciences 0654 Paper 6 question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.