1 (a) Fig. 1.1 is an image of a transverse section through the trachea of the gas exchange system. [Photomicrograph: transverse section of tracheal wall with labelled lumen of trachea, ciliated epithelium and perichondrium; two unlabelled structures X (a gland in the tissue beneath the epithelium) and Y (a cartilage layer with many cells) have label lines to boxes.] Fig. 1.1 Write the names of structures X and Y on Fig. 1.1 in the boxes provided. [2] (b) The perichondrium contains collagen fibres, composed of collagen molecules. Collagen is an example of one type of biological molecule. State the name of the type of biological molecule of which collagen is an example. [1] (c) Some structures in the gas exchange system are listed in alphabetical order in Table 1.1. - Write YES in the box provided if the structure contains smooth muscle. - Write NO in the box provided if the structure does not contain smooth muscle. Table 1.1 alveolus | bronchiole | bronchus | trachea | [1] [Total: 4]
A Level Biology 9700 · Paper practice
Paper 2 past paper questions
Every archived Biology 9700 Paper 2 question in one place. Practise them by topic, then sit a full paper under timed conditions.
Most-tested topicsBiological molecules 68Cell structure 67Transport in mammals 63Cell membranes and transport 60Immunity 56Nucleic acids and protein synthesis 56
You’re practising 2020–2021 papers. The 2022–2026 papers, including 2026, need a plan.
Unlock from $6/mo1 Fig. 1.1 is a transmission electron micrograph of cells from duckweed, Spirodela oligorrhiza. [Electron micrograph Fig. 1.1: elongated plant cells with nuclei and many chloroplasts and mitochondria; labels A to E point to cell structures (A and C appear to be membrane-bound structures, B a nucleus, D cytoplasm region, E a cell wall); a line labelled X is drawn across the width of one cell. Magnification x4275.] (a) Calculate the actual width of the cell labelled X. Write down the formula you will use to make your calculation. Show your working and give your answer in micrometres to one decimal place. formula [box] … um [3] (b) (i) Table 1.1 lists some biological molecules found in plant cells. Complete Table 1.1 by choosing one letter from Fig. 1.1 that indicates a cell structure where each biological molecule is found. Table 1.1 biological molecule | letter from Fig. 1.1 DNA | cellulose | phospholipid | histone proteins | [4] (ii) State the name of a cell structure, visible in Fig. 1.1, where ATP is synthesised. [1] (iii) Name a cell structure that produces mRNA. [1] (c) Describe the evidence from Fig. 1.1 that shows that the image is a transmission electron micrograph. [2] [Total: 11]
1 (a) Fig. 1.1 is a photomicrograph of a region of eukaryotic tissue. Some of the cells are in stages of mitosis. [Photomicrograph Fig. 1.1: columns of rectangular cells with dark-stained nuclei; cell E at the left shows chromosomes lined up at the cell centre and cell F at the right shows two sets of chromosomes separating.] (i) Identify which stage of mitosis is shown in cell E and in cell F in Fig. 1.1. E … F … [2] (ii) Microtubules are present within the cells that are in stages of mitosis, but these are not visible in Fig. 1.1. State the function of microtubules in mitosis. [1] (iii) State, with a reason, whether Fig. 1.1 shows a region of animal or plant tissue. [1] (b) Semi-conservative replication of DNA occurs during interphase, before mitosis begins. Write the correct term in the spaces provided to complete each of statements A to D. A The DNA double helix unwinds and is separated into two template strands when … bonds holding the two strands together are broken. B One of the template strands of DNA is copied in fragments. The enzyme … is required to join the fragments together to form a continuous strand of DNA. C Complementary DNA nucleotides are added to the template strands, catalysed by the enzyme … . D … are regions of repeating nucleotide sequences at the ends of chromosomes that allow the continued replication of DNA, without the loss of genes. [4] [Total: 8]
1 The Golgi body, rough endoplasmic reticulum (RER) and smooth endoplasmic reticulum (SER) form part of the internal membrane system of a cell. The membranes have a fluid mosaic structure. Fig. 1.1 is a transmission electron micrograph of one area of a liver cell showing a region with RER and a region with SER. Mitochondria are also visible in the image. [Transmission electron micrograph: liver cell with layered RER, a region of SER tubules, and two mitochondria labelled.] Fig. 1.1 (a) Describe the differences in structure and function between RER and SER. [3] (b) Phospholipids are one of the main components of membranes. Describe the structure of a phospholipid molecule. [2] (c) One function of a Golgi body is to package molecules into Golgi vesicles. (i) A Golgi body and Golgi vesicles are not visible in Fig. 1.1. Describe the features, other than the presence of Golgi vesicles, that would help you identify a Golgi body in a transmission electron micrograph of another area of the same liver cell. [2] (ii) Some Golgi vesicles contain secretory proteins for release from the cell. Describe the sequence of events that occurs following the packaging of a secretory protein into a Golgi vesicle to its release from the cell. [3] (iii) Some Golgi vesicles contain glycoproteins or glycolipids to be added to the cell surface membrane. Outline the role of glycolipids in the cell surface membrane. [1] [Total: 11]
1 (a) Fig. 1.1 is a transmission electron micrograph of cells from the leaf of a plant. [Electron micrograph: plant leaf cells with a large central space labelled Z, chloroplasts labelled Y with starch grains, and a nucleus labelled X.] (i) Name the cell structures X, Y, and Z. X ... Y ... Z ... [3] (ii) State two ways in which the structure of an animal cell differs from plant cells such as those shown in Fig. 1.1. 1 ... 2 ... [2] (b) (i) Cell structure Y in Fig. 1.1 contains a large starch granule (grain). Name the chemical reagent used to test for starch and state the colour change that will be seen if starch is present. reagent ... colour change ... [2] (ii) Starch granules contain amylose and amylopectin. Describe the similarities and differences between the structure of amylose and the structure of amylopectin. [4] [Total: 11]
1 There are two types of cell, prokaryotic and eukaryotic. Bacterial cells are prokaryotic and plant cells are eukaryotic. (a) There are differences in the structural features that are common to bacterial cells and plant cells. For example, the cell surface membrane in a plant cell contains cholesterol, but in a bacterial cell the membrane contains molecules known as hopanoids. Cholesterol and hopanoids have the same function. Some of the main structural features common to both types of cell are shown in Table 1.1. Complete Table 1.1 by giving one difference between a bacterial cell and a plant cell for each structural feature listed. The difference between the cell surface membranes of the two types of cell has been completed for you. Table 1.1 feature common to bacterial and plant cells | bacterial cell | plant cell cell surface membrane | contains hopanoids | contains cholesterol ribosome | | DNA | | cell wall | | [3] (b) One role of the cell surface membrane of bacterial cells and plant cells is the transport of substances into and out of cells. Explain how membrane carrier proteins and membrane channel proteins are involved in the transport of substances into and out of cells. [3] (c) Fig. 1.1 is a photomicrograph showing chloroplasts in plant leaf cells. [Photomicrograph: several plant leaf cells with small chloroplasts, labelled, lying around the edge of each cell.] Fig. 1.1 Explain why the chloroplasts are seen only around the periphery (edge) of each plant cell. [1] (d) Fig. 1.2 shows plant cells in a root tip where cell division by mitosis is taking place. [Photomicrograph: root tip cells, some with visible chromosomes at different stages of mitosis, including one with chromosomes lined up at the centre and others with condensed chromosomes.] Fig. 1.2 Identify two cells in Fig. 1.2 that are in different stages of mitosis. Draw a label line to each cell and add the name of the stage of mitosis that is shown by the cell. [2] [Total: 9]
1 Fig. 1.1 is a diagram showing a stage in protein synthesis. [Diagram: a ribosome on a strand of messenger RNA (A) with bases shown, transfer RNA molecules bound (B labelled, D the anticodon on a tRNA in the ribosome, E an anticodon on a second tRNA), and a growing chain of amino acids (C) leaving the ribosome. Not to scale.] Fig. 1.1 (a) (i) Name the stage of protein synthesis that is shown in Fig. 1.1. [1] (ii) Identify A, B and C in Fig. 1.1. A B C [3] (iii) State the base sequences at D and E. D E [1] (b) Mutagenesis is a process that leads to a change in the amino acid sequences of proteins. Scientists carry out mutagenesis to investigate the importance of particular amino acids in protein structure and function. Outline how changing one amino acid in the beta-globin polypeptide of haemoglobin may change the structure and function of a molecule of haemoglobin. [4] [Total: 9]
2 Starch molecules are the main storage molecules in many types of cereal grain, such as the grain of the barley plant. (a) When the seed inside a barley grain germinates, genes coding for digestive enzymes are switched on. The enzymes that are synthesised catalyse the hydrolysis of storage molecules such as proteins and starch. (i) Explain what is meant by a gene. [2] (ii) The hydrolysis of proteins in the barley seed produces amino acids that can be used in the synthesis of the proteins required for formation of the seedling (young plant). Fig. 2.1 is an incomplete diagram of the molecular structure of the smallest amino acid, glycine. Each molecule of glycine has two carbon atoms. [Diagram: a carbon atom with an H above and an H below and a bond to the left, joined to a second carbon atom with an open bond going down to the right.] Fig. 2.1 Complete Fig. 2.1 to show the molecular structure of glycine. [2] (iii) Starch is a mixture of two different molecules. Name these two molecules. [1] Two of the enzymes synthesised by the barley seed are alpha-amylase and maltase. These are involved in the hydrolysis of the stored starch during seedling formation. In the food industry, the starch extracted from barley seeds (barley starch) is used in the production of sugar syrups. Fig. 2.2 summarises the reactions catalysed by alpha-amylase in the production of maltose syrup and by maltase in the production of glucose syrup. [Diagram: barley starch -> maltose catalysed by alpha-amylase; maltose -> glucose catalysed by maltase.] Fig. 2.2 (b) Some of the substances shown in Fig. 2.2 are listed in Table 2.1. Complete Table 2.1 to identify which of the terms polysaccharide, monosaccharide and macromolecule apply to each of the substances listed. Use a tick or a cross in every box. Table 2.1 substance | polysaccharide | monosaccharide | macromolecule glucose | | | maltase | | | maltose | | | starch | | | [3] When producing sugar syrups, there are advantages in using enzymes extracted from microorganisms. For example, some enzymes extracted from microorganisms are heat stable. Heat-stable enzymes are used to increase productivity because the reactions can be carried out at higher temperatures. (c) Suggest one other advantage of using enzymes obtained from microorganisms, rather than enzymes extracted from barley seeds, in the production of sugar syrups. [1] (d) Fig. 2.3 is a graph showing how the activity of alpha-amylase extracted from barley seeds changes as the temperature increases from 10 degrees C to 66 degrees C. [Graph: percentage enzyme activity (0 to 100) against temperature (0 to 100 degrees C); activity rises from about 2 at 10 degrees C to a peak of 100 at about 48 degrees C, then falls steeply to 0 at about 66 degrees C.] Fig. 2.3 (i) Explain the effect of temperature on the activity of alpha-amylase extracted from barley seeds, as shown in Fig. 2.3. [3] (ii) Sketch on Fig. 2.3 the curve that would be obtained using alpha-amylase enzyme that is heat stable. [2] [Total: 14]
2 Fig. 2.1 shows three molecules of water. [Diagram Fig. 2.1: three water molecules drawn as O with two H atoms each; dotted lines join an O of the central molecule to an H of each of the other two molecules.] (a) Describe the hydrogen bonding that occurs between the water molecules shown in Fig. 2.1. [3] (b) The human enzyme, salivary amylase, is composed of one polypeptide. Fig. 2.2 represents the structure of a molecule of salivary amylase. [Diagram Fig. 2.2: ribbon model of a folded protein showing alpha helices, beta sheets and loops.] (i) Explain the role of hydrogen bonding in maintaining the secondary structure of proteins, such as salivary amylase. [1] (ii) Explain the role of hydrogen bonding in maintaining the tertiary structure of proteins such as salivary amylase. [2] (c) Outline the importance of water as a solvent in plants. [3] [Total: 9]
2 Sugars are transported within phloem sieve tubes from a source, such as a mature leaf, to a young leaf, which acts as a sink. The young leaf also needs water and dissolved mineral ions, which arrive at the leaf within xylem vessels. (a) As the young leaf matures, the quantity of sugar taken up by the leaf decreases to zero, but the need for water increases. Suggest and explain why the quantity of sugar taken up by the developing leaf decreases to zero over time, but the need for water increases. [3] (b) The features listed in Table 2.1 are present in one or more of the three cell types: - companion cell - phloem sieve tube element - xylem vessel element. Complete Table 2.1 using a tick (✓) if the feature is present and a cross (✗) if the feature is absent. Table 2.1 feature | companion cell | phloem sieve tube element | xylem vessel element cytoplasm | | | cell surface membrane | | | lignified cell wall | | | nucleus | | | [4] [Total: 7]
2 Smallpox, measles and HIV/AIDS are infectious diseases caused by different viruses. These different viruses share some structural features. (a) State one structural feature that would confirm that a pathogen is a virus. [1] (b) The virus that causes smallpox belongs to a different genus to the virus that causes measles. Name the viruses that cause these diseases. smallpox … measles … [2] (c) Explain why antibiotics, such as penicillin, cannot be used to treat measles. [2] (d) Antibiotics may be prescribed for a person with HIV/AIDS. Suggest why antibiotics may be prescribed for a person with HIV/AIDs. [1] (e) Smallpox is the only infectious disease of humans that has been globally eradicated. This eradication was due mainly to a successful global vaccination programme. Most people who were given the vaccine gained immunity to the disease. A student correctly listed four reasons for the success of the global vaccination programme for smallpox. These reasons are listed in Fig. 2.1. Fig. 2.1: The virus did not mutate. A live virus, closely related to the smallpox virus, was used in the vaccine. The vaccine was freeze-dried and so was thermostable (heat stable). The vaccine was easy to administer (give), so little training was required. (i) Discuss how the reasons listed in Fig. 2.1 contributed to the success of the eradication of smallpox. [4] (ii) Table 2.1 lists four types of immunity. Complete each row of Table 2.1 with a tick (✓) or a cross (✗) to summarise the types of immunity gained by a person who received the smallpox vaccine. [1] Table 2.1: type of immunity | gained (✓) / not gained (✗) active immunity | artificial immunity | natural immunity | passive immunity | [Total: 11]
2 (a) Fig. 2.1 is a transmission electron micrograph of a transverse section through a blood capillary that is surrounded by actively respiring cells. [Electron micrograph: a capillary containing a dark, elongated red blood cell labelled Q, lined by an endothelial cell with a nucleus, surrounded by fluid R and muscle cells with mitochondria.] (i) Identify cell Q shown in Fig. 2.1. [1] (ii) Fluid R is formed from blood in the blood capillary. State and explain one difference between the composition of fluid R and the composition of the blood in the capillary. difference ... explanation ... [3] (b) (i) The cell surface membranes of the respiring cells have a role in regulating the exchange of substances between the cells of the body and the blood. Draw a diagram in the space below to show the arrangement of phospholipid molecules in the cell surface membrane. [2] (ii) Cholesterol is a molecule found in the cell surface membrane. Describe one role of cholesterol in the cell surface membrane. [1] (c) Nicotine is one of the components of tobacco smoke. Nicotine can cross cell surface membranes and enter the bloodstream. (i) Describe the short-term effects of nicotine on the cardiovascular system. [2] (ii) Nicotine is absorbed from the blood plasma into the cells of the capillary wall. Scientists have suggested that nicotine is transported from the blood plasma into these cells using a type of co-transporter mechanism. Fig. 2.2 shows how nicotine may be transported from the blood plasma into a cell. [Diagram: a co-transport protein in the cell surface membrane between blood plasma and cytoplasm; H+ ions move down their concentration gradient out of the cell while nicotine is transported against its concentration gradient into the cell.] The co-transporter mechanism shown in Fig. 2.2 is different from the co-transporter mechanism that moves sucrose into the cytoplasm of a companion cell in phloem tissue. Outline the similarities and differences between the co-transport of nicotine and the co-transport of sucrose. [3] [Total: 12]
2 The high blood pressure at the arterial end of a capillary network results in some components of blood leaving the capillaries and forming tissue fluid. At the venous end, the presence of plasma proteins allows movement of water by osmosis back into the capillaries. Fig. 2.1 is a diagram showing a capillary network. The lymph vessels and the blood vessels at the arterial and venous ends of the network are also shown. [Diagram: an artery on the left leads into a capillary network surrounding body cells and tissue fluid, a vein on the right, and a lymph vessel leaving at the bottom; capillaries, tissue fluid, body cells and lymph vessel are labelled.] Fig. 2.1 (a) Red blood cells and plasma proteins, such as albumin, remain in the capillaries and are not found in tissue fluid. Explain why red blood cells and albumin do not leave the capillary. [2] (b) Name the chemical reagent or reagents used to test for proteins in a sample of blood plasma and state the colour change that will be seen if protein is present. reagent or reagents colour change [2] (c) When a person moves from sea level and stays at high altitude for a few months, there is an increase in the number of red blood cells per mm^3 of blood. Explain why this increase occurs. [3] (d) A low blood albumin concentration can lead to a condition known as oedema. Oedema is a swelling of tissues caused by the accumulation of tissue fluid surrounding the body cells in the capillary network. Suggest and explain how a low blood albumin concentration can lead to oedema. [3] (e) Albumin transports some cell signalling molecules from the cells where they are synthesised to their target cells. The cell signalling molecules bind to specific cell surface membrane proteins on the target cells. Name the type of membrane protein to which the cell signalling molecules bind. [1] [Total: 11]
2 Pepsin is an enzyme that hydrolyses proteins (protease). Some students used pepsin from the stomach of a mammal. The activity of the pepsin was investigated by placing a small quantity of the enzyme with a known concentration of the protein albumen. Fig. 2.1 shows the progress of the enzyme-catalysed reaction that was carried out at 20 degrees C. [Graph: concentration of product in umol dm^-3 (0 to 10) against time in min (0 to 60); the curve rises steeply to about 6 at 10 min, 8.5 at 20 min and levels off at 10 from 40 min.] Fig. 2.1 (a) Calculate the initial rate of the reaction. initial rate of reaction = [2] (b) (i) The procedure was repeated to find the effects on the activity of the pepsin using a competitive inhibitor at the same temperature, 20 degrees C. Predict the results that will be obtained using the competitive inhibitor. [2] (ii) The procedure was repeated without the competitive inhibitor but at the higher temperature of 30 degrees C. Predict the results that will be obtained at 30 degrees C. [2] (c) The students extended their investigation by using pepsin from a different species of mammal. The experiments were carried out at 20 degrees C and without a competitive inhibitor. With reference to Fig. 2.1, explain the advantage of calculating the initial rate of reaction in each experiment. [2] [Total: 8]
3 T-helper lymphocytes and Leydig cells are two types of mammalian cells. The main role of T-helper lymphocytes and Leydig cells is to synthesise and secrete cell-signalling molecules. - T-helper lymphocytes synthesise proteins known as cytokines. - Leydig cells synthesise the steroid (lipid) hormone testosterone from cholesterol. Leydig cells also synthesise cholesterol. (a) State one way in which cytokines are involved in an immune response. [1] (b) Fig. 3.1 shows part of a mammalian cell. [Electron micrograph: part of a cell with the edge of the nucleus at the top and several large mitochondria with cristae in cytoplasm containing much membrane-bound smooth-looking endoplasmic reticulum.] Fig. 3.1 (i) State, with reasons, whether Fig. 3.1 shows part of a Leydig cell or part of a T-helper lymphocyte. [2] (ii) Underline the correct name for the type of image shown in Fig. 3.1 and explain your choice. photomicrograph / scanning electron micrograph / transmission electron micrograph explanation [2] (c) Testosterone molecules and cytokine molecules are transported in the circulatory system to reach their target cells. Testosterone molecules are able to enter their target cells and bind to receptors within the cytoplasm. (i) Outline one way in which testosterone molecules could enter their target cells. [2] (ii) Cytokine molecules are not able to enter their target cells. Suggest and explain why cytokine molecules are not able to cross the cell surface membrane to enter their target cells. [2] [Total: 9]
3 Visking tubing can be used to investigate the properties of cell membranes. A student carried out an experiment to investigate osmosis using Visking tubing. An outline of the investigation is shown in Fig. 3.1. [Diagram Fig. 3.1: a measuring rule beside Visking tubing containing sucrose solution with a meniscus; the tubing is put into a U-shaped tube containing 15 cm^3 of sucrose solution (0.9 mol dm^-3); afterwards the meniscus is at a different height.] - Six pieces of Visking tubing were filled with 10 cm^3 of different concentrations of sucrose solution: 0.0, 0.4, 0.8, 1.2, 1.6 and 2.0 mol dm^-3. - The height of the meniscus of each solution in the Visking tubing was measured. - The pieces of Visking tubing were put into test-tubes containing 15 cm^3 of 0.9 mol dm^-3 sucrose solution. - After 20 minutes, the pieces of Visking tubing were removed from the test-tubes and the height of the meniscus in each was measured. The results are shown in Table 3.1. Table 3.1 concentration of sucrose solution inside Visking tubing / mol dm^-3 | difference in height of meniscus after 20 minutes / mm 0.0 | -12 0.4 | -4 0.8 | -2 1.2 | +1 1.6 | +6 2.0 | +11 (a) The Visking tubing used by the student was not permeable to sucrose. Explain the results shown in Table 3.1. [3] (b) When red blood cells are placed in water they are destroyed by bursting. The student also investigated how red blood cells are affected by immersion in solutions of sodium chloride of different concentration. Blood samples of the same volume were added to solutions of sodium chloride in separate test-tubes. After 10 minutes, the student took 0.1 cm^3 of the blood samples from the test-tubes and estimated the percentage of red blood cells that had burst in each blood sample. Fig. 3.2 shows the student's results. [Graph Fig. 3.2: percentage of red blood cells destroyed by bursting (0 to 100) against concentration of sodium chloride solution (0.00 to 0.25 mol dm^-3); 100% up to 0.04, then falling through about 80 at 0.06, 45 at 0.08, 28 at 0.10, 12 at 0.12 to 0% at 0.14 and above.] Describe and explain the effects on red blood cells of immersion in different concentrations of sodium chloride as shown in Fig. 3.2. [4] [Total: 7]
3 In mammals, some cell signalling molecules are steroid (lipid) hormones. These hormones are transported in the bloodstream to reach capillary networks. At a capillary network, hormones pass out of the blood into tissue fluid. (a) Fig. 3.1 is a diagram of a capillary network. [Diagram Fig. 3.1: a capillary network with blood from an artery entering at left and blood to a vein leaving at right; body cells and tissue fluid between the capillaries; a blind-ended vessel X drains tissue fluid.] (i) Describe the differences between the blood arriving at the arterial end of the capillary network and the tissue fluid surrounding the body cells. [3] (ii) Not all the tissue fluid passes back into the blood capillaries to enter the bloodstream. Some of the tissue fluid drains into blind-ended vessels, such as vessel X shown in Fig. 3.1. Name the fluid that is formed in vessel X. [1] Hormone S is a steroid hormone involved in cell signalling. Fig. 3.2 shows the sequence of events that occurs when hormone S enters a target cell. [Diagram Fig. 3.2, not to scale: hormone S passes through the cell surface membrane, binds to cytoplasmic receptor R to form a hormone-receptor complex, which enters the nucleus and binds DNA at B; mRNA leaves the nucleus and is translated at C on a structure G producing a polypeptide. Key: hormone S, cell surface membrane receptors, cytoplasmic receptors, nuclear receptor, messenger RNA, polypeptide.] (b) Explain why hormone S, shown in Fig. 3.2, does not need to pass through a transport protein to enter the cytoplasm of the target cell. [2] (c) The target cell can respond to other cell signalling molecules in addition to hormone S. The cell has receptors in the cell surface membrane, in the cytoplasm and in the nucleus. Explain why hormone S binds only with receptor R in the cytoplasm and not with the other receptors shown in Fig. 3.2. [1] (d) The hormone-receptor complex shown in Fig. 3.2 enters the nucleus and binds to DNA. This switches on a gene coding for a polypeptide that is synthesised in the cytoplasm. (i) Name the structure through which the hormone-receptor complex enters the nucleus. [1] (ii) Name the processes occurring at B and C. B … C … [2] (iii) Name structure G. [1] (e) Cell signalling by hormone S results in the production of a functioning globular protein molecule composed of three identical polypeptide chains. After the synthesis of these polypeptides, changes need to occur to form the functioning globular protein molecule. Outline the changes that need to occur to form the functioning globular protein molecule. [4] [Total: 15]
3 HIV protease is an enzyme composed of two identical polypeptide chains. Each polypeptide chain is 99 amino acids long. During translation, the amino acids are joined by peptide bonds to form the polypeptide chain. (a) Describe how a polypeptide of HIV protease is produced by the process of translation. [4] (b) The synthesised polypeptide has a primary protein structure and can form a tertiary protein structure after translation. There are more bond types in the tertiary structure. Compare the peptide bond formed during translation with the types of bond made during tertiary structure formation. [3] (c) Some polypeptides are translated as part of one long polyprotein chain. After translation, enzymes cut the polyprotein into separate functioning proteins. HIV protease cuts a polyprotein that has been produced within the host cells of actively replicating HIV. The separate proteins are required in the replication of the virus. Fig. 3.1 shows how the two polypeptide chains of HIV protease form an enzyme with an active site enclosed by flaps, forming the flap region. [Diagram: ribbon model of HIV protease with the flap region at the top and the active site labelled in the centre.] Fig. 3.1 (i) The flap region of HIV protease is flexible. With reference to Fig. 3.1, suggest and explain how the mechanism of action of HIV protease can be described as an induced fit. [3] (ii) Indinavir is one of the therapeutic drugs used in HIV anti-retroviral therapy (ART). It is similar to the polyprotein substrate of HIV protease. Suggest and explain how indinavir acts as a therapeutic drug. [2] [Total: 12]
3 Cholera is an infectious disease caused by the bacterial pathogen Vibrio cholerae. (a) Describe how V. cholerae is transmitted from an infected person to an uninfected person. [2] V. cholerae releases a toxin called choleragen. Choleragen is a protein molecule made up of six polypeptides (subunits). (b) Fig. 3.1 is a ribbon diagram of a molecule of choleragen. [Ribbon diagram: a protein with helices and beta sheets; one long alpha helix region is labelled T.] Describe what is shown by the part of the molecule labelled T. [3] (c) Vaccination can be used to prevent the spread of cholera. The vaccine used contains part of the choleragen molecule and also contains dead cells of V. cholerae. (i) Phagocytes play an important role in the immune response to a vaccine. Phagocytes contain many lysosomes. Describe the function of lysosomes in phagocytes. [2] (ii) Suggest the advantage of having a vaccine that includes dead cells of V. cholerae and part of the choleragen molecule. [2] (d) The World Health Organization states that most cases of cholera can be treated with oral rehydration therapy. To reduce the risk of antibiotic resistance developing, antibiotics are only recommended for the most serious cases. Discuss the consequences of the development of antibiotic resistance in V. cholerae. [4] [Total: 13]
3 Baculovirus is a virus that kills some of the insect pests of major crops. When the virus is released to the outside of the insect body, it is contained within stable, protective structures known as polyhedrons. The main component of the polyhedron is a protein molecule, polyhedrin. Polyhedrons can be sprayed onto plants as a bioinsecticide. They are ingested by feeding insect larvae and once inside the insect gut they break down to release the virus. (a) Explain why the term infectious disease can be used to describe the effect of baculovirus on insects. [2] (b) Suggest and explain the conditions present in the insect gut that can cause the breakdown of polyhedrons. [2] (c) A polyhedrin molecule is composed of three identical polypeptides. Each polypeptide is 245 amino acids long. The first 10 amino acids of the polypeptide are shown in Fig. 3.1. 1 met - 2 pro - 3 asp - 4 tyr - 5 ser - 6 tyr - 7 arg - 8 pro - 9 thr - 10 ile - Fig. 3.1 Fig. 3.2 A is a ribbon diagram of a single polypeptide. Fig. 3.2 B shows a polyhedrin molecule composed of 3 polypeptides. The two diagrams are not to the same scale. [Diagram: A, ribbon diagram of one polypeptide with helices, sheets and loops, N and C termini labelled; B, ribbon diagram of three polypeptides packed together.] Fig. 3.2 With reference to Fig. 3.1 and Fig. 3.2, describe the structure of a polyhedrin molecule. [4] (d) The sequence of DNA nucleotides for the gene in baculovirus that codes for the polyhedrin polypeptide has been determined. Explain why the amino acid sequence of the polypeptide cannot be used to deduce this sequence of nucleotides in the gene that codes for the polyhedrin polypeptide. [3] [Total: 11]
Paper 2: quick facts
Which topics come up most in A Level Biology 9700 Paper 2?
The most-tagged topics in A Level Biology 9700 Paper 2 are Biological molecules (68), Cell structure (67) and Transport in mammals (63), out of 294 past-paper questions from 2020-2026. These are archive counts, not a prediction, and a question can carry more than one topic.
Are the A Level Biology 9700 Paper 2 questions free?
84 of the 294 A Level Biology 9700 Paper 2 questions are free to practise. The other 210 need a plan for A Level Biology 9700, from $6 a month.
Do the A Level Biology 9700 Paper 2 questions have answers?
Yes. Each A Level Biology 9700 Paper 2 question shows the official mark scheme answer.